OpManager Enterprise: Previously, there was an upgrade failure caused by a device data sync issue in the Config Management module. This issue has been fixed now.
Build No 127140 - October 20, 2023
OpManager: Previously, there was an issue while integrating Microsoft Teams with OpManager. This issue has been fixed now.
OpManager: Earlier, there was an upgrade failure due to Network Configuration Manager device data sync issue. This issue has been fixed now.
OpManager: From version 127133, slowness was observed in the Interface list view page when a filter was chosen. This issue has been fixed now.
Build No 127139 - October 10, 2023
General: We have improved the truststore handling flow, which may help avoid frequent truststore corruption.
General: Previously, an error occurred when refreshing specific dashboard pages, or while navigating between dashboards in products other than OpManager. This issue has been fixed now.
General: In a fresh installation, when redirected from the web-client page that shows startup progress, the default admin credentials were not pre-filled in the login form after the first start. This issue has been fixed.
OpManager: There was an issue while Associating / Dissociating devices, when more than 100 devices were associated to a monitor or a credential. This has been fixed.
OpManager: For MSSQL users, there was a problem with displaying notes in the "All Alerts with Notes" section under System reports. This issue was identified in OpManager versions starting from 126115, and it has since been resolved.
OpManager Enterprise: From version 126322, in the central server there was an issue while generating CSR under Security settings -> SSL configuration. This issue has been fixed now.
Enterprise Edition: Previously, there was a startup failure in a freshly installed probe, if OAuth had been configured in the Central server for Mail Server Settings. This issue is applicable for the EE customers upgraded to version 126322 or above.
OpManager MSP: Previously from 127136 version, when a new Probe was installed, new user management data were not synced from the Central to Probe server. This issue has now been fixed.
NCM: Previously from 127136 version, when a new Probe was installed, new user management data were not synced from the Central to Probe server. This issue has now been fixed.
OpManager: Previously, users experienced upgrade failures, due to case insensitive WMI classname in the "WMIClass" table. This has been fixed now.
Build No 127138 - September 22, 2023
OpManager: Previously, there were issues in listing Groups under Inventory page in the Central Server. This has been fixed now.
Build No 127123 - September 04, 2023
General: There was an error alert shown while sending test mail, if SSL/TLS had been disabled. This issue has now been fixed.
OpManager: Previously, WMI and CLI data collection failed due to credential loading issue. This has been fixed now.
OpManager EE: After upgrading to version 126322 or above, Central - Probe users sync failed if user profile image files were missing in Central server. This issue has now been fixed.
OpManager EE: After upgrading to version 126322 or above, the Operator and Custom Role users created via AD Autologin from Central server, were not synced to the Probe servers. This issue has now been fixed.
OpManager MSP: While creating or updating an user, there was an issue during user sync at probes, if only a customer with no associated probe was selected. This issue has now been fixed.
Build No 127122 - August 22, 2023
General: Earlier, there was a minor bug during installation in OpManager Central. This bug has been fixed now.
General: Previously, from versions 12.5.230 and above, .NET Framework 3.5 was used to remove custom patches/additional folders in the OpManager directory which affected the functionality during/after the upgrade. The .NET Framework 3.5 dependency will not be required for successive upgrades.
General: In Dbquery Page, when a single column name was executed, there was an issue in navigating to the next page.This issue has been fixed.
General: Previously while receiving Alert notifications via SMS, all the variables were displayed in a single line. This has been fixed now.
General: When configuring Virtual IP based failover, if the file 'product.zip' already existed under the OpManager home directory (installation folder), then it should be deleted to create an updated file. However, the delete operation failed when the folder path contained a space which caused the Secondary service startup failure. This has been fixed now.
General: Previously, under Audit Report->General-> Devices->Filter, unauthorized devices were listed that are not to be viewed by the Business view user. This has been fixed now.
General: There was a problem in exporting user management table data to XLS/CSV format. This has been fixed.
General: Previously, a "duplicate email id" error was displayed while adding / editing users in Probe, if the mail id was already used by an user in Central. This issue has been fixed now.
General: Previously, if the SAML authentication had been configured with 'Email ID' as NameID format, the users created with Local authentication could not access the Apps tab, if they had logged in via SAML. This issue has been fixed now.
General: Previously in the Alarms page, when no columns were selected from the Column Chooser for display, it resulted in broken UI. This issue has been fixed now.
General : Previously, in Failover Settings if email address had been configured, the secondary server would not take over, incase of primary server failure. This issue is applicable for the customers upgraded to versions 12.6.306 or above, and has been fixed now.
General: Previously, there was a Cross-site WebSocket hijacking vulnerability, which led to unauthorized access of websocket connection. This has been fixed now by configuring trusted origins. (Reported by CERTXLM. Refer : CVE-2023-29505))
General: There was an issue in versions 127100 and above, where the Restore operation failed to copy certain files, if the file's source was located outside of the OpManager directory. This has been fixed now.
OpManager: In certain instances, the StandAloneToProbe migration failed due to file integrity alarms. This issue has been fixed now.
OpManager: The webhook requests failed due to the unnecessary spaces used in the header or custom parameter key values. This has been fixed now.
OpManager: Previously, while invoking a webhook, certain issues were faced when the data was sent in JSON format. This has been fixed by escaping the reserved characters.
OpManager: Fixed the mistranslation issues in the error messages and changed the UI texts related to SDP OP and ServiceNow.
OpManager: Previously, in some cases, the ticket settings were left unchecked, and an error was thrown while saving the SDP OP configuration. This issue has been fixed now.
OpManager: The error messages related to SDPOP configuration and notification profiles, have been handled now.
OpManager: The ServiceNow CI duplication issue on manual sync, that was faced during certain instances, have been fixed now.
OpManager: The UI text has been updated from "Jira ServiceDesk" to "Jira Service Management".
OpManager: Introduced support for the Jira Issue related new APIs, that were introduced in Jira Service Management, from versions 9 and above.
OpManager: In SDP Cloud, the system description's field value type, has been changed from single line to multi line, to support more than 250 characters.
OpManager: Previously in Integrations, even when certain hosts were excluded from the proxy server, proxy was applied to excluded hosts once the OpManager service was restarted. This issue has been fixed now.
OpManager: Previously, the notification trigger report was not updated properly for ServiceNow events and incidents. This issue has been fixed now.
OpManager: Previously, OpManager was not able to fetch more than 100 records for Notification Profile ticket fields from ServiceDeskPlus Cloud. This issue has been fixed now.
OpManager: Previously, OpManager was not able to fetch more than 1000 channels from Slack. This issue has been fixed now.
OpManager: Previously, only custom fields were fetched the incident form, and was listed under the notification profile. Now, OpManager will fetch all the fields from ServiceNow.
OpManager: Under Alarms tab, three additional filter options have been added to sort the alarms by time.
OpManager: When the Rearm Criteria is configured but the Match Criteria is not configured for a Trap Processor, the associated trap alarm was not cleared. This issue has been fixed now.
OpManager: Previously, in the Alarms tab of a device snapshot page, the tooltip text of the alarm actions (Add Note, Acknowledge, Unacknowledge, Clear, Delete) would always be shown in English (US) irrespective of the selected language. This issue has been fixed for the respective languages now.
OpManager: Previously, when generating the Notification Profiles Triggered report, filtering using the corresponding notification profiles of a selected device was not possible because of an internal issue. This has been fixed now.
OpManager: Henceforth, if the user chooses to 'Suppress Alarms' of any device, the same will be reflected on the 'Recent Alarms' tab of a device snapshot page.
OpManager: The MSSQL specific monitor data will now be displayed under the "MSSQL" tab of the device snapshot page of a MSSQL Device, instead of being displayed in the right pane.
OpManager: Introduced an option that allows users to export the audit reports(General), in PDF or XLS formats.
OpManager: The maximum limit of database statistics has now been increased from 15 days to 31 days.
OpManager: Previously, when many URLs were added, the pages were loading slowly. This issue has been fixed now.
OpManager: Previously, there was an out of memory error due to the load in URL monitoring. This issue has been fixed now.
OpManager: When more than 10 URLs were deleted in bulk, the time taken to delete the URLs was quite long. This issue has been fixed now.
OpManager: Previously, when a sensor name was "NULL" for IPMI devices, the hardware tab was not loading properly. This issue has been fixed now.
OpManager: Previously, there were issues in scheduling downtime for URL monitors. This has been fixed now.
OpManager: Enhanced the efficiency of polling, by optimizing the queries executed, when adaptive thresholds was enabled.
OpManager: Hardware monitoring support has now been introduced for Palo alto firewalls and Huawei switches.
OpManager: From OpManager version 12.6.151, data collection was delayed for agent-monitored devices, when the monitors load increased. This has been fixed now.
OpManager: Previously, when the OpManager service was down, some previously collected data was not updated for agent-monitored devices, thereby resulting in data loss. This issue has been fixed now.
OpManager: Previously, when the notification server startup issue occurred, the webclient UI faced loading issues for Linux-based OpManager installation. This has been fixed now.
OpManager: For agent-monitored devices, the alerts raised for CPU & Memory utilization monitors, will now be displayed along with the top three processes used.
OpManager: Previously, the data collected by the agent device was not plotted in a graph properly due to a timestamp issue. This has been fixed now.
OpManager: For Agent based Monitoring enabled VMs, data collection was not happening for virtual protocol-related monitors, if the monitors were associated from the Performance Monitors Settings page. This issue has been fixed now.
OpManager: Previously, users faced issues with Nutanix discovery, when a new Nutanix cluster was discovered with a UUID similar to an existing Nutanix cluster. This issue has been addressed by blocking the same.
OpManager: Fixed the issues related to VM migration cases in Nutanix discovery, and rediscovery.
OpManager: In the Alarms page, a new column has been added under table view to display the IP Address of the Alarm source.
OpManager: Users can now configure two interfaces when adding link between two devices in a Business View. Also, they can choose to display In/Out traffic of the respective interfaces.
OpManager: Henceforth, clicking on the link in a Business View will display the interface traffic details on a separate panel instead of redirecting to the interface snapshot page.
OpManager: Previously, there were issues in scheduling downtime for URL monitors. This has been fixed now.
OpManager: Introduced a new category of reports called "Performance Monitors by devices", that lists the devices and the corresponding performance monitors associated with them, along with their threshold configuration details.
OpManager: While creating a custom report for Alarms module using the advanced report feature, an error message appeared when more than 5 columns were selected for the Device Details field. This issue has been fixed now.
OpManager: Under Business View page, the scroll bar wasn't displayed in the Dashboard View. This issue has been fixed now.
OpManager: Previously, for agent-monitored devices, agent related custom parameters were reverted during the upgrade, which led to false alerts for device availability. This issue has been fixed now.
OpManager: Previously, the syslog received from a device, were not being displayed in the syslog viewer. This issue has been fixed now.
Enterprise Edition: Users can now view OpUtils summary widgets in OpManager Central's dashboard.
Enterprise Edition : In OpManager Probe, after upgrading to version 126322 and above, during user creation, a "license count exceeded" error was displayed, as the user count was taken from both the Central and the Probe. This issue has been fixed now.
Enterprise Edition: File integrity alarm was raised in the OpManager Probe's tray icon. This issue has been fixed.
Enterprise Edition: When there is a delay in processing a Probe's data in the Central, an alarm will be raised to notify the user.
Enterprise Edition: Essential to Enterprise Edition Migration failed when there was a space in the Folder name. This issue has been fixed now
Enterprise Edition: Previously, due to an internal issue, passive probes configured in a failover setup were whitelisted as active probes when acknowledging SSL handshake errors. This issue has now been fixed.
Enterprise Edition: Earlier, there were some unwanted options available in OpManager's Central device snapshot for Enterprise Edition. These options are now removed.
Enterprise Edition: Previously, after upgrading to version 126322 or above, users sync from Central to Probe will fail, if multiple domains were configured in the Central ,and if one of those domains were configured in the Probes before the upgrade. This issue has been fixed now.
OpManager Probe: In the user management page, clicking the super admin user's profile, while logged in as a normal admin user has been restricted.
OpManager MSP: Customer Account mapping and probe site mapping in OPM MSP - SDP MSP integration has now been increased.
OpManager MSP: Creating a new SNMP trap processor in a Probe selected from the Central server's UI, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.
NCM: In NCM Probe, during user creation, a "license count exceeded" error was displayed, as the user count was taken from both the Central and the Probe. This issue has been fixed now.
Build No 127109 - July 25, 2023
General: Previously, in Failover Settings if email address had been configured, the secondary server would not take over, incase of primary server failure. This issue is applicable for the customers upgraded to versions 12.6.306 or above, and has been fixed now.
General: Previously, there was a Cross-site WebSocket hijacking vulnerability, which led to unauthorised access of websocket connection. This has been fixed now by configuring trusted origins. (Reported by CERTXLM. Refer : CVE-2023-29505)
General: There was an issue in versions 127100 and above, where the Restore operation failed to copy certain files, if the file's source was located outside of the OpManager directory. This has been fixed now.
General: Previously, a "duplicate email id" error was displayed while adding / editing users in Probe, if the mail id was already used by an user in Central. This issue has been fixed now.
General: Previously, if the SAML authentication had been configured with 'Email ID' as NameID format, the users created with Local authentication could not access the Apps tab, if they had logged in via SAML. This issue has been fixed now.
General: PostgreSQL version has been upgraded to 14.7. The PostgreSQL vulnerability issues from version 10.21 have been fixed now.
General: JRE version 1.8.0_362 will be used in fresh installations(exe / bin).
General: Earlier, from version 12.5.415 there was an issue in "Remember Me". This has now been fixed.
General: Tomcat, Wrapper and various product-specific components have been updated.
General: Previously, there was a Denial of Service (DOS) attack vulnerability in Object deserialization. This has been fixed now. (Reported by Da22le)
General: Earlier, PostgreSQL database read only user faced a permission issue in accessing newly created tables. The issue has been fixed.
General: After upgrading to version 127100, there was an issue in enabling SSL with a self-signed certificate if it was enabled for the first time via OpManager UI. This issue has now been fixed.
OpManager: Previously, for agent-monitored devices, agent-related custom parameters were reverted during the upgrade, which led to false alerts for device availability. This issue has been fixed now.
OpManager: Previously, the syslogs received from a device, were not being displayed in the syslog viewer. This issue has been fixed now.
OpManager EE : Previously, after upgrading to version 126322 or above, users sync from Central to Probe will fail, if multiple domains were configured in the Central ,and if one of those domains were configured in the Probes before the upgrade. This issue has been fixed now.
OpManager EE : In OpManager Probe, after upgrading to version 126322 and above, during user creation, a "license count exceeded" error was displayed, as the user count was taken from both the Central and the Probe. This issue has been fixed now.
OpManager MSP : Creating a new SNMP trap processor in a Probe selected from the Central server's UI, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.
NCM: In NCM Probe, during user creation, a "license count exceeded" error was displayed, as the user count was taken from both the Central and the Probe. This issue has been fixed now.
Enterprise Edition: Introduced an option that allows users to download and install APM plugin to have a smooth integration.
Enterprise Edition: From version 126306, Mail server settings could not be synced in a freshly installed probe. This issue has been fixed now.
Enterprise Edition: Creating a new SNMP trap processor in a Probe selected from the Central server's UI using the Unified Console option, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.
OpManager: Fixed certain security vulnerability issues related to xmlrpc-client-3.1.3 jar and xmlrpc-common-3.1.3.jar (CVE-2016-5003, CVE-2016-5002, CVE-2016-5004)
OpManager: xmlrpc client and common jars have now been upgraded from version 3.1.2 to version 3.1.3 to enhance security.
OpManager: Previously, in certain cases, stale Linux/Windows credentials were being associated to devices. This issue has been fixed now.
OpManager: Disabled the option to copy files while accessing systems through RDP, to prevent potential security vulnerabilities.
OpManager: Previously, when the Applications Manager plugin was inactive, and one or more users were deleted from OpManager, the users will not be deleted from the plugin, when it was restarted. This issue has been fixed now.
OpManager: When an AD domain was deleted, all the users of that domain were deleted from OpManager, but not from the Applications manager plugin. This issue has been fixed now.
OpManager: Previously, the initial sync between OpManager and Applications manager plugin failed due to database corruption or mismatch issue. This has been fixed now.
OpManager: Previously, there was an initial sync issue between OpManager and APM plugin when OpManager's database was disconnected. This issue has been fixed now.
OpManager: Previously, when a tab character was present in the instance name, the archived data was not dumped in the Central. This issue has been fixed now.
OpManager: Introduced monitoring support for the latest versions of Windows 10 and Windows 11 devices in OpManager.
OpManager: Previously, VMWare tag retrieval failed since the connection was established before verifying the host name. This issue has been fixed now.
OpManager: Users can now navigate to the device snapshot page, from the device names listed in the VMsprawl dashboard widgets.
OpManager: Previously, when the "All virtual machines" reports where filtered based on the vendors, the reports were reset automatically. This issue has been fixed now.
OpManager: Optimized the VMware tags custom field updation process, during the VMware rediscovery.
OpManager: Previously, there were issues with VMware discovery and rediscovery, while updating certain virtual details. This has been fixed now.
OpManager: In certain instances, VMs or hosts with primary IP addresses as v6, were facing issues with being discovered as a virtual server during discovery and rediscovery. This issue has been fixed now.
OpManager: During the audit logging for data collection failures, duplicate auditing occurred in few scenarios. This issue has been fixed now.
OpManager: Previously, for HyperV host's "disk space usage" (VIWMI) monitor, the units were previously displayed in GB, even though they were measured in KB. This issue has been fixed now.
OpManager: Previously, users were not able to select the 'today' criteria in Reports. This issue has been fixed now.
OpManager: When navigated to Script Templates page via the Monitoring side tab under Settings, "More Actions" option was missing. This issue has been fixed now.
OpManager: Device Availability state details are available in the Device summary widget now.
OpManager: Previously, when the UI language was updated, the threshold messages were still being displayed in the default language. This issue has been fixed now.
OpManager: Custom Dashboards will now be visible along with the default dashboard tabs.
OpManager: When the user navigates from the device snapshot page to the maps page using the "Show on Map" option, upon closing the maps page, they will now be automatically redirected to the respective device snapshot page.
General: jQuery UI package has been updated to version 1.13.2, in order to overcome potential vulnerabilities.
General: MomentJS has been upgraded to version 2_29_4 and Moment-Timezone has been upgraded to version 0_5_40.
General: Sometimes, when a widget's embed code is rendered inside a Custom HTML widget, it might fail to load in Noc View. This issue has been fixed now.
General: Previously in Virtual IP based failover, when the primary server's DB disconnected, the secondary server tried to take over as the master server and failed, since the Virtual IP was already bound to the primary server. This has now been fixed.
General: The set of allowed special characters for password complexity was different when creating a user account. The issue has now been fixed.
General: Previously when you delete the last selected group configured for AD auto-login, the domain details and the associated user accounts will also be deleted. This issue has been fixed now.
General: Previously, SAML users faced 'Invalid referenceID error' in the login page when they accessed OpManager login page with the FQDN of the server. This issue has been fixed now.
General: When the certificate nears its expiry date (less than 15 days), we'll regenerate the certificate when the user clicks on the self-signed certificate option in the UI.
General: From now, NOC view will only be displayed if the user has access to at least one dashboard in the NOC view.
General: During AD group auto-login, the primary group of the user was not fetched if the group was not found under the provided BaseDN . Now as a fallback, OpManager will look under the 'CN=Users' container to fetch the primary group.
General: When the user account of a shared dashboard owner is deleted, there was an issue when updating the dashboard details. This has been fixed now.
General: During AD group auto-login, the group names matching will not be case sensitive now.
General: Earlier, PostgreSQL database read only user faced a permission issue in accessing newly created tables. The issue has been fixed.
General: Previously, there was a slowness during upgrade. This issue has now been fixed.
OpManager: Henceforth, users can update the existing group name from the group snapshot page.
OpManager: Henceforth, the "Device up and responding" alarm will also contain the last downtime information.
OpManager: During device rediscovery, the values of 'Serial number' custom field were not updated in Central due to an internal issue. This has been fixed now.
OpManager: Previously, the alarm in the Group snapshot page were not redirected to the Alarms page. This issue has been fixed now.
OpManager: Henceforth, users will be able to add units and numberings when creating/editing a Rack view.
OpManager: Previously, if a user configured an Interface group with empty thresholds, it wasn't possible to update the threshold values for the interfaces (of that group) from the Interface snapshot page. This issue has been fixed now.
OpManager: The issues in redirection from 3D floor view to device snapshot page and rack page has been fixed now.
OpManager: With the Perf Group option, performance monitors can now be categorized into a group and used for generating Advanced reports.
OpManager: The Notification Profiles now features a new section for 'Applications', to list all the actions from the Applications Manager plugin.
OpManager: While associating devices under Add/edit Notification Profiles, sometimes searching for a specific device name might be slow when a lot of results show up. This has been fixed now.
OpManager: In the past, there was an issue when OpManager essential edition license was applied to standalone products such as NCM, NFA, FWA, OpUtils. This has now been fixed.
OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on July 23, 2023.
OpManager: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on July 23, 2023.
OpManager Storage Monitoring: Storage Node Status monitor has been newly added to the device template of EMC Isilon Storage device model.
OpManager Storage Monitoring: For capacity monitors associated to RAID protocol, incorrect polling time was shown when the credential authentication failed. This issue has been fixed now.
OpManager Storage Monitoring: A spike in CPU usage was noticed after associating throughput monitors to Huawei storage devices. This issue has been fixed now.
Enterprise Edition: PPM Upgrade failure in OpManager probe with remote PostgreSQL database from versions older than 126275 to latest, has been fixed.
Enterprise Edition: From version 12.6.322, if the central and probe server OS languages were different, and when the probe was accessed from the Central UI, there were issues in translation. This issue has been fixed now.
Enterprise Edition: From version 12.5.000, when the Central server was installed using Remote PostgreSQL DB, there was an issue in migrating OpManager Essential to Enterprise. This has been fixed now.
Enterprise Edition: From 126322 version, the 'Dashboard' page of a Business view wasn't visible in the Central when 'All Probes' filter is chosen. This issue has been fixed now.
Enterprise Edition: From 126322 version, the Availability distribution in the Group snapshot page wasn't visible in the Central when 'All Probes' filter is chosen. This issue has been fixed now.
NCM: Now, post operations are available in Network Configuration Manager device snapshot page in OpManager Enterprise Edition central.
Build No 126329 - June 21, 2023
OpManager: Previously, there was an out of memory error while carrying out archiving-related operations. This issue has been fixed now.
OpManager: Previously, in certain instances, when processes with arguments length more than 1000 were added, the processes were shown to be in down state. This issue has been fixed now.
OpManager: Previously, when devices were associated with stale WMI/CLI credentials, false credential alerts were being raised. This issue has been fixed now.
OpManager: For Japanese versions, the script monitor's threshold status "Normal" was not being displayed properly under the monitors tab of the device snapshot page. This issue has been fixed now.
OpManager: Previously, when a WMI monitor was in the scheduler queue, the test monitor action did not work. This issue has been fixed now.
OpManager: Previously, while deleting agent from the UI, agent entries were not being removed when the agent was in non-communication state. This issue has been fixed now.
OpManager: During OpManagerAgent Installation, in some cases, the installed agent device was mistakenly mapped with an already existing different device, instead of adding it as a new device. This issue has been fixed now.
OpManager: The performance scalability of agent request process, while updating monitors to all agents in bulk, has been enhanced now, even when a large number of agents has been installed.
OpManager: OpManager : Previously, in the match content section of URL, users were not able to give double quotes as the double-quoted strings were considered as a single string. This issue has been fixed now by introducing "\" as an escape character.
OpManager: Previously, when accessed with HTTP, users were not able to access Applications manager plugin in OpManager Central. This issue has been fixed now.
OpManager: If the URL was added using the "Import via CSV" option, users were not able to edit the URLs from their respective snapshot pages. This issue has been fixed now.
OpManager: Previously, partial data was being displayed in the real-Time graph of a SNMP Multiple type monitor with an OID expression, when the denominator OID value for some instances returned as zero. This issue has been fixed now.
OpManager: In OpManager central under the HyperV host snapshot page, newly discovered VMs were not listed under the Virtual machines tab, and for those discovered HyperV VMs, details were not being shown under the VM Info tab. This issue has been fixed now.
OpManager: When a virtual parent device has been unmanaged, and the corresponding child entities have been unmanaged and managed, virtual monitors of the child entities are shown as disabled under DCM, when the parent device is managed back. This issue has been fixed now.
OpManager: Previously, when more than one filter was being applied, URLs were not being listed under the "Servers -> URL" subtab. This issue has been fixed now.
OpManager: The forecasted value of CPU Utilization and Memory Utilization monitors in Adaptive Thresholds was exceeding 100 in few cases, this has been fixed now.
OpManager: Forecast trend report related time filters were shown for other reports. This is fixed now.
OpManager: From OpManager versions 126151, data collection was not happening properly for agent-monitored devices, due to certain issues faced while validating data files. This has been fixed now.
General: jqGrid has been updated to version 5.7.0, in order to overcome potential vulnerabilities.
OpManager: Previously, the alerts raised when script monitors were down, were not being cleared properly. This issue has been fixed now.
OpManager: Introduced an option that allows users to export the snapshot graphs, in the form of PDFs.
OpManager: Previously in certain instances during VMware rediscovery, few VMs were not being fetched due to SSLHandshakeException, which lead them to be moved under "OPM-DEVICE". This issue has been fixed now.
OpManager: Introduced an option to configure ServiceNow custom fields in Notification profile, to create ServiceNow incidents for OpManager alerts.
OpManager: Previously, in ServiceDesk Plus Cloud, when the entity size was too big, there were certain issues faced while updating the request. This has been fixed now.
OpManager: Users can now sync domain controller servers from OpManager to ServiceDesk Plus OP.
OpManager: In ServiceDesk Plus Cloud, fixed the issues faced while updating the request notes, when the request status was not closed.
OpManager: To avoid slowness in the Interface Templates association page, users will henceforth be able to choose a maximum of 1000 interfaces at once.
OpManager: Previously, there was slowness observed in the Groups list view page when more groups were added. This has been optimized now.
OpManager: Henceforth, users will be able to add a maximum of 2000 elements to a group from the Inventory page.
OpManager: Previously, there was an issue while downloading a scheduled report. This has been fixed now.
OpManager: Previously, during Cisco ACI discovery, the corresponding Tenants and Endpoint Groups were not discovered. This has been fixed now.
OpManager: Previously, there were issues in scheduling downtime for URL monitors. This has been fixed now.
Enterprise Edition: Discovery Rule Engine is now supported in OpManager Central. Users can now 'Add Device to Business View' and 'Associate Notification Profile' in Central server.
Enterprise Edition: Remote code execution vulnerability was identified during the data transfer in the Enterprise Edition. This has been fixed now. (Refer: CVE-2023-31099)
Enterprise Edition: Due to improper termination of the SSL certificate verification process in some cases, there was a sudden spike in CPU usage. This issue has been fixed now.
Enterprise Edition: Creating a new SNMP trap processor in a Probe selected from the Central server's UI using the Unified Console option, failed while trying to update the Match Criteria and Rearm Criteria fields. The issues have been fixed now.
Enterprise Edition: From now, users created in the Central can be synced across the Probes.
Enterprise Edition: A Probe drop down option has been introduced in the Central's UI to select and view a particular Probe's UI from the Central.
Enterprise Edition: By enabling the Centralized Configuration option, common configuration changes such as Mail server, SMS server, Rebranding and Proxy server settings made in the Central will be synced with all the Probes.
Enterprise Edition: A new option called LiteCentral has been introduced in the Central server's UI to support scalability when more than 5000 devices are required to be monitored.
Enterprise Edition: On-demand report generation will be supported in the Central when the LiteCentral option is enabled. A report can be scheduled in the Central, the data will be fetched from the respective Probe and displayed in the Central.
Enterprise Edition: To enhance security and to maintain user scope, an additional user authentication layer has been introduced.
Enterprise Edition: The webpage loading speed in the client server has been optimized for better end-user experience.
Enterprise Edition: Queries with slow responses have been identified and optimized.
Enterprise Edition: When OpManager Essential edition is migrated to a Probe server, the associated user details in the Essential edition will be maintained in the Probe also.
Enterprise Edition: APM plugin user details from the Central will be synced across the Probes.
Enterprise Edition: A new section called Enterprise Settings has been introduced under System Settings.
Enterprise Edition: Previously, if the connection between a Probe and the Central is not established, the Probe will shutdown in 15 days. Now, it will shutdown in 7 days and emails will be triggered to notify the user.
Build No 126315 - May 24, 2023
General: Introducing OAuth authentication support in Mail Server Settings for Google & Microsoft.
General: If Virtual IP based failover model has been configured, when the central is down, the slave probe will try to fetch the license from the master probe.
General: For improved security, customers can now enable/disable weak ciphers and weak TLS versions in the GUI itself.
General: For improved security, customers can now enable/disable weak ciphers and weak TLS versions in the GUI itself.
General: In build versions from 126151, there was an issue while executing commands in Run System Command & Run Program notification profiles. This has now been fixed.
OpManager: Introduced monitoring support for the latest versions of Windows 10 and Windows 11 devices in OpManager.
OpManager: While emailing or scheduling a report, restricted special characters used in message and subject fields will now be indicated on the product UI.
OpManager: The time range in minutes for Integrated reports scheduled weekly and monthly will appear from 0 to 60 in multiples of 5.
OpManager: Special characters in scheduled reports URL has been encoded now for all languages.
OpManager: For MSSQL versions older than 2012, fetching data for advanced reports failed. This issue has been fixed.
OpManager: Previously, users were unable to add the RCA name, description and annotation in languages other than English. This issue has been fixed.
OpManager: Certain untranslated texts found in the RCA feature has been translated now.
OpManager: Previously, 3D Floor View and Rack View widgets failed to fetch data. This issue has been fixed now.
OpManager: In the license expiry page, after deleting multiple users, only OpManager users were deleted and Applications Manager plugin users were not. This issue has now been fixed.
OpManager: Previously, initial sync failure occurred when Applications Manager plugin professional edition was installed in OpManager Enterprise edition. This has been fixed now.
OpManager: Previously, the OpManagerAgent stopped working when an empty IP address list returned from the monitored device. This issue has been fixed now.
OpManager Storage Monitoring: Previously, fetching data of node monitors failed for NetApp ONTAP storage device model. This issue has been fixed now.
OpManager Storage Monitoring: Previously, discovery failed for Huawei devices in certain cases. This issue has been fixed now.
OpManager Storage Monitoring: There was an issue while discovering Dell EMC VNX-BLOCK device model when security mechanism was enabled in NaviCLI. This issue has been fixed now.
OpManager: Microsoft Teams integration - Users can now integrate OpManager with Microsoft Teams via OAuth provider, and send alerts to the concerned Channel in Teams.
OpManager: There was an issue in sending recurring Notification mails from certain Profiles configured for a device, because the alarm got cleared before delay schedule. This issue has been fixed.
OpManager: Henceforth, the custom fields widget under Device and Interface snapshot pages will display only the fields with values.
OpManager: Around 83 device templates and 19 SNMP monitors have been newly added for a wider support of device models during device discovery.
OpManager: Device Templates and monitors that were previously mapped to duplicate vendor names have now been unified. The templates and monitors mapped to Fortinet Inc. and Fortigate vendor names are now unifed as 'Fortinet'. Similarly, Arista as 'Arista Networks', F5 Networks Inc. as 'F5 Networks' and CyberPower System as 'CyberPower'.
OpManager: Device templates having SysOID that starts with .1.3.6.1.4.1.10734, will henceforth be classified as Trend Micro.
OpManager: Previously, the devices under Juniper SRX 4100, Juniper SRX 4200 and Juniper SRX 4600 device types were incorrectly categorized as Switch instead of Firewall. This issue has been fixed now.
OpManager: Two-byte character support has been added for the group name parameter across multiple APIs.
OpManager: A widget for Network Path Analysis has newly been added. It is now available among the list of General Widgets.
OpManager: The minimum polling interval for monitoring a network path, has now been reduced from 10 minutes to 5 minutes.
OpManager MSP: Introducing Customer based license allocation model, using which the License elements can now be allocated on a per customer basis.
Build No 126300 - May 04, 2023
Enterprise Edition: Remote code execution vulnerability was identified during the data transfer in the Enterprise Edition. This has been fixed now.(Refer: CVE-2023-31099)
Enterprise Edition: Due to improper termination of the SSL certificate verification process in some cases, there was a sudden spike in CPU usage. This issue has been fixed now.
OpManager: Previously, during Cisco ACI discovery, the corresponding Tenants and Endpoint Groups were not discovered. This has been fixed now.
Build No 126299 - April 20, 2023
OpManager: Previously in certain instances during VMware rediscovery, few VMs were not being fetched due to SSLHandshakeException, which lead them to be moved under "OPM-DEVICE". This issue has been fixed now.
OpManager Storage Monitoring: Storage monitoring support has been extended to Tegile Intelliflash device model.
OpManager: OpUtils actions including remote port blocking and wake on LAN capability have been added to Workflow.
General: If SAML authentication has been configured in MSSQL installations, there was an issue in restoring the backup data if the setup was upgraded from 125597 or below. This has now been fixed.
General: Previously, the syslog forwarder was sending garbled characters if non-English characters had been forwarded. This has now been fixed.
OpManager: Previously, the syslog flow rate was always shown as 0, even if multiple syslogs were being processed. This has now been fixed.
OpManager MSP: A Probe's display name can be changed now. Multiple probes can have the same display name, if they are under different customers.
Enterprise Edition: To update the details of the proxy server used for communication in the Enterprise Edition, an option has been introduced in the product UI.
OpManager: WLC Monitoring is now supported for H3C WX3520H, WX5540H and Ruijie WS6008 device.
OpManager: The maximum ping packet count has now been restricted to 4, to optimize scalability in availability monitoring.
OpManager: The XSS vulnerabilities identified in the Business View and Inventory pages have now been fixed.
OpManager: Restriction of device synchronization from the add-on modules has now been enabled by default.
OpManager: Previously, the sub-interfaces weren't added when discovering interfaces from the device snapshot page. This has now been fixed.
OpManager: Previously, there were issues in plotting the stack topology map in the Switch Stack snapshot page. This has now been fixed.
OpManager: The XSS vulnerabilities identified in the Business View Summary widget have now been fixed.
OpManager: Previously, when HyperV-VM had multiple memory instances, wrong value was being displayed for the memory under the VM info tab. This issue has been fixed now.
OpManager: Previously, for nutanix virtual machines, under the virtual machines tab, the virtual disk capacity was being displayed in MB instead of GB. This issue has been fixed now.
OpManager: Previously, even when adaptive thresholds were disabled and manual thresholds were enabled in device templates bulk edit threshold page, the alarm message will be displayed as adaptive thresholds-related alarm. This issue has been fixed now.
OpManager: Previously, the RowCount functional expression was not working for String type OIDs. This issue has been fixed now.
OpManager: Enhanced the DCOM authentication level to Packet Privacy for device WMI communication.
OpManager: For Japanese versions, there were issues with exporting the XLS URL response time report. This has been fixed now.
OpManager: Previously, the "Test URL" option under device specific URL's alarms page was not working properly. This issue has been fixed now.
OpManager: Previously, the groups were not sorted properly when 'Group by Groups' filter was chosen in the Tree view pane under the Inventory tab. This issue has been fixed now.
OpManager: Previously, when an alarm of an unmanaged URL was cleared, the URL status was changed to clear, instead of unknown/unmanaged. This issue has been fixed now.
OpManager: Previously, there was slowness identified in the Dashboard when configuring group filter in the 'Top-N Least Available' and 'Servers Top-N Least Availability' SLA widgets. This has been fixed now.
OpManager MSP: Previously, it wasn't possible to save the interfaces rediscovered from the device snapshot page because of an internal issue. This has been fixed now.
Build No 126286 - April 06, 2023
OpManager : From OpManager versions 126151, data collection was not happening properly for agent-monitored devices, due to certain issues faced while validating data files. This has been fixed now.
OpManager : Previously, the alerts raised when script monitors were down, were not being cleared properly. This issue has been fixed now.
Build No 126285 - March 27, 2023
General: In build versions from 126151, there was an issue while executing commands in Run System Command & Run Program notification profiles/templates. This has now been fixed.
Build No 126284 - March 25, 2023
General: Initially, there was a browser crash issue while accessing demo video urls from https-enabled Netflow Analyzer and Network Configuration Manager. This issue has been fixed now.
Build No 126283 - March 21, 2023
General: For enhanced security, SSL will be enabled by default with a self signed certificate in all the editions during installation. Administrator users can update the SSL certificate under Settings -> Security settings option.
General: For enhanced security, SSL will be recommended to be enabled after the upgrade. Users can skip this notification for 2 weeks, after which the recommendation will be displayed again.
General: If SAML authentication has been configured in MSSQL installations, there was an issue in restoring the backup data when the base build version is 125597 or below. This has now been fixed.
Enterprise Edition: OpManager Enterprise Edition customers who are using the NetFlow/Firewall addon(s) will now be able to view Probe server's NetFlow/Firewall Inventory data in the Central server under Network -> Flow Analysis/Firewall Log Analysis tab.
Enterprise Edition: When unprocessed archived files are found in the OpManager folder, it will be notified to the user via an email and an alert.
Enterprise Edition: The upgrade status of the Probes was not marked completed when a user followed the manual upgrade procedure after uploading the PPM files. This issue has been fixed now.
OpManager: Security enhancements have been done for ServiceNow integration's two way sync.
OpManager: Previously, only a maximum of 100 technician groups were fetched from SDP Cloud. This has been fixed now.
OpManager: Previously, the "Message Key" value was not populated properly for ServiceNow events. This issue has been fixed now.
OpManager: Previously, updating one asset details affected the remaining assets too. This issue has been fixed now.
OpManager: Audit logs will now be added for all critical operations that were carried out doing third party integrations.
OpManager: While selecting MIBs under Trap Settings, it was noticed that the previously selected MIBs were not saved. This issue has been fixed now.
OpManager: Previously, when the URL debug was enabled, sensitive information of few APIs were being logged. This issue has been fixed now, to prevent sensitive data exposure.
OpManager: Description of datastore-related monitors have now been updated to convey that they will be supported only for non-vsan datastores.
OpManager: SNMP based Availability monitoring failed for devices from 126262 version due to an internal issue. This has been fixed now.
OpManager: Trap Processors listed under Load from MIBs option were not updated even after the MIB file was modified. This has been fixed now.
OpManager: There was an issue in accessing the device snapshot page of storage devices that contains special characters. This issue has been fixed now.
OpManager: Probe name and Customer name has now been included in the email subject of Data Collection Manager Diagnostic report.
OpManager: Optimised the widget loading performance for certain widgets.
OpManager: The Stored XSS vulnerability issues leading to JS injection, that were identified in the URL Monitors, have been fixed now. (Reported by Ranjit Pahan)
OpManager: Previously, when exporting the IPSLA list view (under Network tab) using export as CSV option, the 'Path' column was missing in the CSV file. This issue has been fixed now.
OpManager: Previously, there were issues in deletion of business views from the list view under the Maps tab. This has now been fixed.
OpManager: The XSS vulnerabilities identified with the custom links in various pages, have now been fixed.
OpManager MSP: Probe key file details are not shown in the Probe details page, if there are more than 50 probes. This issue has been fixed now.
Build No 126264 - February 22, 2023
General: The visualization library 'vis.js' has been upgraded to 9.1.3 version.
General: Notification Profile/template related critical operations such as add, update and test will now be carried out with OTP authentication if TFA has been enabled.
General: setEnv.bat failed File Integrity scanning after performing the DB Configuration using DBConfiguration.bat. This issue has now been fixed.
OpManager: SNMP based Availability monitoring failed for devices from 126262 version due to an internal issue. This has been fixed now.
OpManager: The XSS vulnerabilities identified with the custom links in various pages, have now been fixed.
OpManager: Around 79 device templates and 41 SNMP monitors have been newly added for a wider support of device models during device discovery.
OpManager: Previously, a few SNMP monitors displayed inappropriate data due to incorrect OID expression, unit or graph name. This issue has been fixed now.
OpManager: Switch Stack monitoring is now supported for 'Cisco 9500 Fixed Switch Stack' switches as well.
OpManager: Previously, during network discovery using CSV import, column headers in Japanese were displayed as garbled text. This issue has been fixed for the Japanese installation now.
OpManager: Previously, the racks in a Business view were not redirected to the rack snapshot page. This issue has been fixed now.
OpManager: Previously, the alarms that appear upon hovering the business view shortcut were not redirected to the respective alarm page. This issue has been fixed now.
OpManager: Previously, there were issues in fetching the device list in the Inventory, Network and Server tabs when multiple vendors were selected from the filters under Donut view. This issue has been fixed now.
OpManager: In the Japanese installations, there were issue in updating the custom field values if the imported CSV file contains field name in English text. This issue has been fixed now.
OpManager: Previously, the distribution chart from the Device Availability Dashboard report had discrepancies while generating 24 hour data after the 28th of a month. This issue has now been fixed.
OpManager: The XSS vulnerability issues identified in the Meraki & IPSLA pages have been fixed now.
OpManager: Previously, there were issues while associating device template to a number of devices in bulk. This issue has been fixed now.
OpManager: Disabled the "Time Window" option under the Schedule reports page of Interface graphs and Device Availability, Packet Loss and Response Time graphs.
OpManager: Previously, when users open a interface snapshot page from a device snapshot page, they were not able to navigate to the snapshot page of the subsequent interface. This issue has been fixed now.
OpManager: Previously, for interface widgets created using Interface Report Builder, the same parent name was displayed in the tooltip. This has now been fixed by introducing their respective parent names.
Enterprise Edition: Previously, custom field values updated in the Probe for devices or interfaces wasn't pushed to the Central due to an internal issue. This issue has been fixed now.
OpManager : Previously, there was an XML External Entity (XXE) vulnerability in UCS module. It has been fixed now. (Reported by Cisco Talos-Marcin Nago. Refer: CVE-2022-43473)
OpManager : For Agent-Monitored Devices, there was an Issue in Agent communication due to the mismatch of actual hostname in SSL certificate. This has been fixed now.
OpManager : For log file monitors, apart from string identification, users will now also be able to view the occurrence count of search string in the Alarm Message.
OpManager : Previously, agent-related files were reported in file Integrity scanning. This issue has been fixed now.
OpManager : Previously, users were not able to fetch report for data stores by using the "generate report" option under the "inventory" tab. This has been fixed now.
OpManager : In some cases, the script files that were created temporarily during data collection were not being deleted when the product shutdown abruptly. This has been fixed now.
OpManager : Even when adaptive threshold settings were disabled globally, they were still being associated to virtual devices. This has been fixed now.
OpManager : Previously, an incorrect message was triggered when Test Script was executed on a Linux device with improper credential configuration. This issue has been fixed now.
OpManager : The total alarm count displayed under the AD/ Exchange tab in the device summary page, was not reduced when alarms were cleared. This issue has been fixed.
OpManager : Previously, unwanted hardware alerts were raised for standby state of Juniper devices. This has been fixed now.
OpManager : Under the device snapshot page, the "Installed Softwares" tab has been renamed to "Installed Software".
OpManager : Introduced support for basic Latin special characters in URL Name.
OpManager : The info messages for managing and unmanaging URLs have now been translated accordingly.
OpManager : Previously, for certain cases, users were not able to update the "Top N monitored values of a performance monitor" widget. This issue has been fixed now.
OpManager : Previously, when any one of the instances in a multiple type monitor had a divide by 0 error, the monitor polling will be disabled via DCM. This issue has been fixed now.
OpManager : When hardware monitoring was disabled under the Monitors settings page, the Hardware information widget data was empty for the newly discovered IPMI SNMP devices. This issue has been fixed now.
OpManager : When incorrect SNMP credentials were used along with right one, the IPMI SNMP discovery was not happening. This issue has been fixed now.
OpManager : Previously, read privilege dashboard users were not able to collect data for dashboard widgets linked to real-time categories. This has been fixed now.
OpManager : Previously in some cases, when LUN serial number length exceeded 100 characters, VMWare discovery failed. This issue has been fixed now.
Enterprise Edition : Introduced a "Data Comparison" tab, under the "Diagnostics Support" page of OpManager Central, that helps users identify the data sync issues between the probes and central setups.
General : Earlier, there was an issue in adding and editing domains in version 126258. This issue has been fixed now.
OpManager : Introduced an option to enable/ disable asset settings for SDP cloud configuration.
OpManager : Minor usability enhancements have been done to File integrity monitoring. The monitors tab in APM plugin will now be displayed by default, when users click on the applications tab.
OpManager : Introduced a feature that allows users to forecast the trends for performance monitors, interface, and datastore graphs, from the device snapshot page.
OpManager : Introduced exclusive reports for forecasting the trends of any performance monitor.
OpManager : Added a forecasting trend widget, that helps users visualise the trends of their desired performance monitor.
NCM : Network Configuration Manager now supports TP-Link Gigabit Switch, Cisco Firepower Threat Defense, MiMOMax-BRU-T, MiMOMax-RRU-T, MiMOMax-BRU-P, and MiMOMax-RRU-P models by default.
NCM : Earlier, there was an issue in adding bulk devices and because of this there was an issue in the distribution of devices. This has been fixed now.
NCM : Earlier, there was an issue in creating a device group from the inventory of role-based users and operators. This has been fixed now.
NCM : Earlier, there was an issue in running a credential rule for bulk devices via "Run Rule Through" option. This has been fixed now.
General : Users were unable to return to the NOC view window when a device snapshot page was opened from the NOC view screen. This has been fixed now.
OpManager : Migration to OpManager Enterprise edition is now possible only from Standard/Professional or Lite editions.
Enterprise Edition : The Probe status icon has been updated in the UI and from this version, only the number of Probes that are down will be indicated.
OpManager: The minimum refresh Interval of the Real Time graphs have been changed from 1 second to 5 seconds to avoid discrepancy in the SNMP device.
OpManager: Previously, there were issues in saving the location values when zoom action was performed in the Maps widget. This has been fixed now.
OpManager: The map file can now be reconfigured using the new 'Edit Map Settings' option in the Google Maps page.
OpManager: In some cases, the OpManager upgrade failed due to an issue with discovery profile name duplication. This has been fixed now.
OpManager: Previously, there was an issue in initiating Interface Discovery in the MSP and RMM editions. This issue has been fixed now.
OpManager: Users who have enabled APM plugin in OpManager can create a custom report for application monitoring data by selecting the Applications module under Advanced report.
OpManager: The polling status of each monitor(s)/ interface(s) can now be viewed under the Monitors/ Interface tab in the device snapshot page.
OpManager: For agent-monitored devices, Introduced a new option to disable automatically updating the IP address when it has been changed in their environment.
OpManager: Previously, when agent-monitored servers with multiple IP addresses were discovered, there were issues while showing their primary IP address. This has been fixed now.
OpManager: While installing the agent in servers with multiple IP addresses, the servers were discovered as a new device even though it already exists in OpManager with the same host name but different IP address. This issue has been fixed now.
OpManager: Previously, when the agent was installed on Azure servers, its default DNS name 'reddog.microsoft.com' was shown for certain instances. This has been fixed now.
OpManager: Previously, there were issue while updating the multi-byte characters in the threshold message field under Availability monitor threshold page. This has been fixed now.
OpManager: Previously, there were issue while updating the multi-byte characters in the Availability Alarm Message field under Device Down Settings page. This has been fixed now.
OpManager: Previously, there were issue in adding a new Device Template with multi byte characters in its name field. This has now been fixed now.
OpManager: High Availability (HA) monitoring is now supported for Firewall, Wireless LAN Controller (WLC), Switch, Router, Server and Load balancer devices.
OpManager: Previously, users were unable to save the Business view (created before 12.5.652), if it contains business view shortcut with custom icon.
General : Previously, when a user profile was deleted, the dashboards created by the user and shared only to roles were also deleted. This has been fixed now.
General : Previously, multibyte characters were not supported in the description fields of dashboard and NOC view. This issue has been fixed now.
General : When failover was configured with a virtual IP address, the product startup failed due to corruption of 'itom_fos.conf' file. This issue has been fixed now.
General : When failover was configured with a virtual IP address, the File synchronization failed due to a missing 'replicateFiles.bat' file. This issue has been fixed now.
General : For builds 125430 and above, Under Audit -> General reports, only the latest row was available in the report for PostgreSQL database, when the time period chosen was more than 7 days. It has been handled now.
OpManager: Earlier, multibyte characters were not supported in the Syslog rule name. This issue has been fixed now.
OpManager MSP : Previously, Customer specific MSP dashboard widgets are not deleted automatically, when a customer is deleted. This issue has been fixed now.
OpManager MSP : Unmanaged probes triggered the Probe-down mail alerts. This issue has been fixed now.
OpManager MSP : Stack overflow error in the websocket client has been fixed now.
NCM: Earlier, there was an issue in importing conditional Advanced Script Configlets. This has been fixed now.
NCM: Earlier, there was an issue in notifying the change through syslog when mail notification too was configured. This has been fixed now.
NCM: Now, whenever scheduling fails without a device, an email is sent to the user and a notification is sent to all administrators.
NCM: Now, creation of a schedule is blocked when there are no devices available in the selected device group.
NCM: Earlier, there was an issue where role-based users' data were not generated in User Access Report. This issue is fixed now.
NCM: Earlier, there was a mismatch of terms which were used to represent the status of PCI review report in the GUI and exported format. This issue is fixed now.
NCM: Earlier, backup failure status was not displayed properly in Japanese language. This issue is fixed now.
NCM: Earlier, when the admin approves the upload request, requested user was displayed as approved user. This issue is fixed now.
NCM: Now, schedule time will also be displayed when an operator requests for Configlet Schedule approval.
NCM: Network Configuration Manager now supports ArubaOS CX, Ubiquiti Unifi, Ubiquiti Edge Switch models, and Ruckus Unleashed network models by default.
NCM: Network Configuration Manager now provides CLI support for Cisco APIC by default.
General: Alarms push notifications only for devices within a user's scope will appear on the product UI.
OpManager: Inappropriate Time window filter in the 'Device Downtime report' has been removed now.
OpManager: A new column 'Device Added Time' has been added to the Advanced Reports page.
OpManager: During Interface discovery, navigating back and forth from the Discovered Interfaces page would halt the discovery process. This issue has been fixed now.
OpManager: Previously, it wasn't possible to save the interface report generated from the Report builder, if the parent device of the selected interface belonged to 'Firewall' category. This issue has been fixed now.
OpManager: When navigating directly to the Business View page from the Inventory dropdown tab, the UI incorrectly showed an 'Add Device' button instead of the 'Add Business View' button. This has been fixed now.
OpManager: Japanese translation missed for few field labels in the link properties page in the Business view have been added now.
OpManager: Previously, the discovery profiles with the profile type "Single Device" (created before version 125174), were not displayed. This has been fixed now.
OpManager: Previously, on initiating interface discovery ( from the device snapshot page) for non-SNMP devices, the GUI showed no progress. Proper alert message will now be displayed instead.
OpManager: Discovery profiles created after updating an existing IPv6 range profile, couldn't be listed due to an internal issue. This has been fixed now.
OpManager: The 'Devices Availability Dashboard report' title in the scheduled PDF report had a minor typographical error which has been fixed now.
General: The unused older version of Apache's 'commons-text' jar has been removed.
OpManager : Previously, there was an XML External Entity (XXE) vulnerability in UCS module. It has been fixed now. (Reported by Cisco Talos- Marcin Noga. Refer: CVE-2022-43473)
OpManager: Previously, users were unable to save the Business view (created before 12.5.652) if it contains business view shortcut with custom icon.
OpManager: Previously, it was unable to save the Business View if it contains links with name exceeding 100 chars. This issue has been fixed now.
OpManager: Previously, there was an issue in initiating Interface Discovery in the MSP and RMM editions. This issue has been fixed now.
OpManager: The Inventory tab now features a new section for 'Applications', to list all the monitors from the Applications Manager plugin.
OpManager: APM plug-in's Dockers, Kubernetes and Openshift monitors can now be viewed as well as discovered from Virtualization -> Containers.
OpManager: A new widget type - Application Widgets has been added in the Add Widgets page for displaying Applications Manager Plugin data. The Application Widgets includes widgets like Applications Health & Availability, Application Monitors HeatMap, Application Monitors Summary, Application Monitor Groups Summary, Application Monitor Groups Tree view, Application Monitors Status.
OpManager: A new category of reports for Applications has been added under the Reports tab to list down all the reports from the Applications Manager plugin.
OpManager: Introduced APM plugin-related startup error messages in the UI and fixed the issues faced while loading the applications tab.
OpManager: Previously, when password was not given while user details were being updated from OpManager to APM, empty passwords were being updated. This has been fixed now.
OpManager: Previously, URLs were not deleted even when the devices associated to it, were removed from monitoring in bulk. This issue has been fixed now.
OpManager: Previously, when the URL snapshot page was accessed from the URL reports section, the resulting snapshot page was not displayed. This has been fixed now.
OpManager: The "Check Now" option for URLs in workflow was giving a blank response. This has been fixed.
OpManager: Previously, functional expressions were not being applied for SNMP Monitors using Float 32/64TC type OIDs. This has been fixed now.
OpManager: Previously, when a script template in MSSQL setup was deleted, users could not add another script template with the same name. This has been fixed now.
OpManager: Due to an exception thrown while executing script during the discovery process, HyperV host discovery failed in certain cases. This has been fixed now.
OpManager: When storage capacity of the cluster or serial number of the disk was not available in PrismAPI response, Nutanix discovery failed. This has been fixed now.
OpManager: Previously, vCenter's VMware map failed to load due to pattern mismatch error of an API parameter. This issue has been fixed now.
OpManager: For certain Xen VMs, incorrect guest OS was displayed. This issue has been fixed now.
OpManager: Previously, test credential for CLI protocol was not working for OpManager installed in linux environment. This has been fixed now.
OpManager : Previously, there was an issue with creating requests in OpManager - SDP On premise integration. This has been fixed for SDP build versions 14002 and above. Kindly refer compatibility document for more info.
OpManager: The PDF design has been updated for OpManager Reports.
OpManager: The default OpManager logo used within the product has been updated.
OpManager: In build versions from 126135, a white screen appeared instead of Choose the Criteria page while accessing the Notification Profile option from the device summary page under Inventory. This has been fixed now.
OpManager: Previously, SNMPv3 based device discovery would fail due to an issue in fetching Engine ID from the device. This has been fixed now.
OpManager: Unable to load Zoho Maps from 12.6.151 version due to an internal issue. This has been fixed now.
OpManager: From versions 12.5.645, in an alarm's snapshot page, log details of workflows not associated with that alarm were displayed. This has been fixed now and only workflows relevant to the selected alarm will be listed.
OpManager: Previously, sensitive user data was logged during Network discovery. This has been fixed now.
General: To enhance security, changes have been done in the InstallShield for Linux builds.
Enterprise Edition: The smart upgrade failed in Probes installed on X11-disabled Linux machines. This has been fixed now.
General: SDP MSP versions 13000 and above will now be compatible with only the latest versions of OpManager.
OpManager: Configuring Alarm Suppression in Quick Configuration Wizard failed for Business Views that had special characters in its name. This has been fixed now.
General : Previously, the Central secondary server details were not available in the new probe installation. This issue has been fixed now.
General : Previously, License file was not pushed to the secondary probe. This issue has now been fixed.
OpManager: The XSS vulnerability issues identified in the Business View page under Inventory, has been fixed now.
OpManager: Configurations and actions of the IP SLA monitor will now be audited.
NCM: Earlier, database tables were used to populate the hardware details of devices. Now, this dependency is removed and the hardware details are populated directly using the parser XML file.
Network Packet Sensor : SupportID: 4948580, 7217728 - IPv6 support has been provided for NetFlow Generator(NFG) & Deep Packet Inspection(DPI)
Build No 126155 - February 03, 2023
OpManager : Previously, when the URL debug was enabled, sensitive information of few APIs were being logged. This issue has been fixed now, to prevent sensitive data exposure.
OpManager : Previously, for URL monitors, there were stored XSS vulnerability issues, that lead to JS injection. This issue has been fixed now. (Reported by Ranjit Pahan. Refer: ZVE-2023-0284)
Build No 126154 - January 25, 2023
OpManager: Earlier, there was a XML External Entity (XXE) vulnerability which led to unauthenticated access of internal resources. This has been fixed now.(Reported by vuln discovery. Refer: CVE-2022-43473)
OpManager: Previously, the search icon was missing in the Layer2 Maps list view page under Maps tab. This issue has been fixed now.
OpManager: Previously, the groups were not sorted properly when 'Group by Groups' filter was chosen in the Tree view pane under the Inventory tab. This issue has been fixed now.
Enterprise Edition: Previously, in a few rare scenarios, the custom field values updated for devices or interfaces in a Probe were not pushed to the Central due to an internal issue. This issue has been fixed now.
Build No 126141 - December 28, 2022
General: Previously, JREMigration.bat/sh files were listed under File Integrity scanning when upgraded from version 12.6.005. This issue has now been fixed.
General : setEnv.bat failed File Integrity scanning after performing the DB Configuration using DBConfiguration.bat. This issue has now been fixed.
OpManager : Previously, there was an XML External Entity (XXE) vulnerability in UCS module. It has been fixed now. (Reported by Cisco Talos-Marcin Nago. Refer: CVE-2022-43473)
Build No 126140 - November 15, 2022
OpManager: Previously, users were unable to save the Business view (created before 12.5.652), if it contains business view shortcut with custom icon.
OpManager: Previously, it was unable to save the Business View if it contains links with name exceeding 100 chars. This issue has been fixed now.
OpManager: Previously, there was an issue with creating requests in OpManager - SDP On premise integration. This has been fixed for SDP build versions 14005 and above. Kindly refer compatibility document for more info.
Build No 126139 - October 21, 2022
Enterprise Edition: An email saying Probe-Central communication lost was incorrectly triggered from few Probes. This issue was identified in OpManager versions from 12.5.645 and it has been fixed now.
Enterprise Edition : The default Database Maintenance limit of the Central server for maintaining Alarms has been increased from 10000 to 50000.
Enterprise Edition : There was an issue while displaying widgets netflow analyzer and firewall analyzer add-ons on the Central server's dashboard. This issue has been fixed now.
Enterprise Edition : In the failover model, there was data loss due to shared folder disconnection between a Probe and the Central. However, this issue has been fixed to prevent data loss.
OpManager MSP: There was an issue while updating existing user details from version 126132. It has been fixed now.
OpManager : Previously, under Alarms, Root Cause Analysis, there was an issue with the UI layout of the Create RCA Profile page. This issue has been fixed.
OpManager : If no new Tampered/External files were detected during the File Integrity auto scanning, the previously raised File Integrity Alarms will be cleared.
OpManager Storage Monitoring : A new option has been introduced in the UI to manage or unmanage monitor instances for storage devices.
OpManager : Queue implementation has been introduced for all outgoing requests to enhance performance of the Third Party Integrations.
OpManager : ServiceNow ticket fields loading performance has been tuned up.
OpManager : The Tree view under Inventory and Widget tabs, has now been optimized to list devices in segments of 1000 each, for improved usability.
OpManager : Previously, when associating a Device Template, the devices were not listed under "Associate to Devices" page in the Central Server. This issue has been fixed now.
OpManager : The APIs for "associateDeviceTemplate" and "getDeviceNotes" have been optimized for better performance.
OpManager : Meraki Switch and Meraki Security devices are now listed in the Switches and Firewalls category list view respectively, under Network tab.
OpManager : For improved security, access limitation has been introduced for all exposed/post APIs.
OpManager : Previously, users with business view scope were able to view unauthorized devices in the 'Infrastructure View' and 'Down devices' widget s in the Mobile App. This issue has been fixed now.
OpManager : Previously, users were unable to save the Business view if it contains business view shortcut with custom icon.
OpManager : The listAllAdvancedReports API that is used to fetch advanced report details such as the Name, Id and Description, has been updated as an external API.
OpManager : From now, a new external api getAdvancedReportData should be used to fetch monitoring data for advanced reports. The getReportsData is applicable only for default reports and is restricted to fetch data for advanced reports.
OpManager : Previously, there were issue in addition of IP SLA monitors with SNMP v1/v2 credentials. This has been fixed now.
OpManager : User roles for APM plugin can now be configured from the User management page under OpManager. Existing user roles that have not been synced, will be provided with the least privilege user roles.
OpManager : We are syncing APM supported applications list and the corresponding device details from OPM to APM plugin for applications auto discovery in APM plugin.
OpManager : In agent monitored devices, alerts were not raised for windows service monitors when all the monitored services were down. This has been fixed now.
OpManager : For agent-based Domain controllers, the FSMO role properties were not updated properly. This has been fixed now.
OpManager : A VMware query that was frequently used in scheduled rediscovery of vCenter/ ESX and few other operations, has now been optimized to reduce the CPU usage of OpManager installed server.
OpManager : During HyperV rediscovery, there was an issue in mapping the newly discovered virtual machine whose discovery failed during the previous discovery process, when auto VM discovery was disabled. This has been fixed now.
OpManager : There was an issue with virtual maps (HyperV, VMware, Nutanix) that had Japanese entity names. This has been fixed now.
OpManager : For VMware virtual machines having 'SUSE openSUSE' OS, the type will now be updated as 'Linux'.
OpManager : There was an issue in associating VMware partition monitor from VMwareVirtualMachine device template for virtual machines having the device type as 'Unknown'. This has been fixed now.
OpManager : For the restart service action enabled windows service monitors in agent-monitored devices, the services were restarting unnecessarily in some instances. This has been fixed now.
OpManager : In some cases, for MSSQL DB based OpManager, there were issues with data collection for files, folders and script monitors. This has been fixed now.
OpManager : Previously, there were issues while associating Windows 11 and Windows Server 2022 device templates with agent-based monitoring devices. This has been fixed now.
OpManager : Introduced a new feature that allows users to sync Layer2 Maps to SDP Cloud CMDB while integrating OpManager with SDP Cloud.
OpManager : Fixed the scalability issues faced while syncing bulk CIs in the SDP cloud.
OpManager : The issue faced while syncing a new custom category field to SDP cloud is fixed now.
OpManager : For agent-monitored devices, data was not being collected for file monitors, due to the failure in digital signature validation. This has been fixed now.
General : Previously, there were issues while exporting data from Availability graphs, Google/Zoho maps, Device Templates and Dependency Tree (under Device Downtime scheduler) in the OpManager MSP and RMM editions. These issues have been fixed now.
General : Serial modem based SMS notification feature is no longer supported now.
General : The Admin and Request APIs used in the OpManager-ServiceDesk Plus MSP integration is now updated from v1 to v3.
Build No 126122 - September 26, 2022
OpManager: Previously, it was unable to update the Business Views created with background color prior to version 11600. This issue has been fixed now.
OpManager: Previously, users were unable to save the Business view if it contained business view shortcut with custom icon.
OpManager : We are now supporting all the special characters in the category field while configuring the notification profile for ServiceNow.
OpManager : Previously, there were some issues while syncing the assets from OpManager to SDP OP. This has been fixed now.
OpManager : Previously, there were minor issues while configuring OpManager-ServiceNow integration. It has been fixed now.
OpManager : Availability graph for access points could not be loaded in Central due to an internal issue. This issue has been fixed.
OpManager : Introduced a new feature that allows users to sync Layer2 Maps to SDPOP CMDB while integrating OpManager with SDPOP. Enabling sync operation automatically builds CI relationship in CMBD. Hence users can now easily have a high level view of the network that further helps them with the impact analysis of the alerts raised.
OpManager : Previously, there was an issue in the addition of IPSLA monitors with SNMP v1/v2 credentials. This has been fixed now.
OpManager: While creating an advanced report, performance monitors data filtered for the last 1 hour was not shown. This issue has been fixed.
OpManager: When advanced reports are scheduled daily using the global schedule option, the reports were generated on alternate days instead of everyday. This issue has been fixed now.
OpManager: When reports are generated and exported using the report builder option, the X-axis values in the exported file were trimmed and did not appear as the actual report. This issue has been fixed now.
OpManager: Editing a scheduled report failed when a Group or Business view associated with that report was deleted. This is conveyed appropriately in the UI with an error message.
OpManager: In the Virtual Type field in advanced reports, when fields other than the default fields are present in the database, the report generated did not show complete data. This issue has been fixed.
OpManager: From now, LAN email id is supported for scheduling a report.
OpManager: The star icon for favorite reports did not appear for other languages except English. This issue has been fixed now.
OpManager: When a report generated using the Report Builder option is exported, the timeToDisplay parameter value pattern mismatch warning appeared. This issue has been fixed now.
OpManager: When Group Name filter was selected in advanced reports, It automatically changed to Device Name. This issue has been fixed now.
OpManager: While scheduling a report, if the Schedule type is changed to Publish URL, the URL variable was not automatically inserted into the message field. This issue has been fixed.
OpManager: Around 755 device templates and 145 SNMP monitors have been added for the proper classification of devices.
OpManager: During discovery, devices and interfaces were incorrectly added to the group created with 'Custom Field' criteria even when the condition failed. This issue has been fixed now.
OpManager: From this version, interfaces will not be moved to Idle Interface state. However, the existing idle interfaces will remain the same and can be managed.
OpManager: Issues with the 'sort' filter in Device Downtime report has been fixed now.
OpManager: Previously, interfaces were duplicated in trap discovery when multiple traps were received simultaneously. This issue has now been fixed.
OpManage Previously, Devices were not added properly in Google/Zoho Map during discovery and rediscovery for Mimomax devicetype. This issue has now been fixed.
OpManager: Introduced support for configuring multiple linear threshold values for the same alert severity.
OpManager: Negative values were returned as SNMP OID response for Disk Utilization and Partition monitors with huge disk space (in the range of TBs). This issue has been fixed now.
OpManager: Hex Code was returned for OCTET STRING type OIDs while checking the custom monitors' response during their addition. This has been fixed now.
OpManager: There was a conflict in rendering the correct image when two realtime graphs were started simultaneously in image mode under two different tabs of the same browser. This has been fixed now.
OpManager: Realtime widgets were either frozen or shrunk in some cases when the dashboards or a particular widget was refreshed. This has been fixed now.
OpManager: The Internationalization inconsistencies in the eventlog monitor's name has been handled. From now on, the event log rules names will be shown based on the user selected language.
OpManager: APM page was inaccessible during AD user login for some users due to an encoding issue in the username. This has been fixed now.
OpManager: The graph in NOC View was plotted improperly in some cases if the data being plotted was huge in size. This has been fixed now.
OpManager: When a device configured with SNMP protocol for availability monitoring was deleted and added again, the default Availability monitoring protocol was set to SNMP instead of ICMP. This issue has been fixed now.
OpManager: In Layer 2 map, interfaces were found missing for devices that shared the same LLDP SysName and for devices that had a parent as well as child device associated with it.
OpManager: In the Watchguard Firewall device snapshot page, the 'Last Connected Time' under VPN Summary was incorrect. This has been fixed now.
OpManager: In build version 126115, certain issues were noticed while deleting a device. This issue has been fixed now.
OpManager: While discovering devices via Trap, the 'Discovered Time' value was not displayed under Inventory -> Devices. It was due to the occurrence of the same device as an external node (devices added from Add-on modules such as NCM, NFA, etc.) in OpManager. This issue has been fixed now.
OpManager: Google Map zip download URL has been changed from http to https.
OpManager: Previously, 'Configure Interface' option was unavailable on the snapshot pages of some networking devices. This has been fixed now.
OpManager: Previously, maximum and minimum values were not displayed properly on the Interface Realtime graphs. This issue has been fixed now.
OpManager: Previously, there were issues when redirecting to the device snapshot page from the 'Dependency Details' tree view in the Device Downtime Scheduler configuration page. This redirection link has been removed now.
OpManager: In the "Interfaces down in a device" widget, the icon for 'admin status' was incorrectly displayed as critical although the Interface Admin status was up. This issue has been fixed now.
OpManager: Previously, Network Discovery was stopped when the approve or ignore devices action was performed when the discovery is in progress. This issue has been fixed now.
OpManager: Previously, unwanted alerts were thrown in Central when in a Probe any Custom Monitor (WMI/SNMP) is deleted or if any Device Template is modified and associated to the Devices or deleted. This has been fixed now.
OpManager: Previously, the Device template added in Central wasn’t pushed to Probe due to an internal issue. This has been fixed now.
OpManager: Previously, a few SNMP monitors were not collecting data due to an incorrect OID expression. This issue has been fixed now.
OpManager: Previously, an incorrect alert was displayed in the Central due to an internal issue that appears when updating or deleting a Device template in Probe. This has been fixed now.
OpManager: During VMware discovery, the configured discovery rule engine was not executed. This issue has been fixed now.
OpManager: When printer devices were rediscovered using the schedule option, the IP address, DNS name and Display Name fields were duplicated due to an internal issue. This issue has been fixed now.
OpManager: During Interface discovery, a "General Failure" error was received when fetching 'ifSpeed' value (though SNMP response was proper in MIB browser). This has been fixed now.
OpManager: Previously, it wasn't possible to discover single device from Shallow Discovery due to a timeout issue. This issue has been fixed now.
OpManager: Previously, there were issues in the addition of IP SLA monitors using SNMP v1/v2 credentials. This has been fixed now.
OpManager MSP: Previously, there was an issue in loading SDP MSP integration settings. This issue has been fixed
OpManager MSP: Previously, on configuring Radius authentication in MSP Central, the Radius authentication option present in the login page of MSP Probe was only shown after service restart. This issue has been fixed now.
Enterprise Edition: There was an issue while displaying NetFlow Analyzer and Firewall Analyzer add-ons related widgets on the Central server's dashboard. This issue has been fixed now.
Enterprise Edition: Previously, the device association page froze while editing a notification profile with large number of devices added to it. This issue has been fixed now.
General: Earlier, there was a Remote Code Execution (RCE) vulnerability in IPv6 address management (CVE-2022-37024) and IPv4 address management (CVE-2022-38772) reported by an anonymous working with Trend Micro Zero Day Initiative. This has been fixed now.
General : To enhance security, we have introduced password protection for Backup Zip files.
General : Pass through authentication feature has been removed. Customers cannot use Pass through authentication for user authentication from now on.
General : Previously, users were not able to apply AMS license when failover was configured. This issue has been fixed now.
General : JsTree plugin has been upgraded to version 3.3.12.
General : Morris js library has been upgraded to version 0.5.1.
General : Raphael js library has been upgraded to version 2.3.0.
General : Select2 plugin has been upgraded to version 4.0.13.
General : Moment plugin has been upgraded to version 2.29.2.
General : Moment Timezone plugin has been upgraded to version 0.5.34.
General : Cropper js plugin has been upgraded to version 1.5.12.
General : Gridstack js library has been upgraded to version 5.0.0.
General : Underscore javascript library has been upgraded to version 1.13.2.
General: A vulnerability resulted in unauthenticated access of the user API key. This issue has been fixed now. (Reported by Anonymous working with Trend Micro Zero Day Initiative. Refer: CVE-2022-36923)
General: OpManager now supports SHA-2 algorithm for SNMPv3 authentication to ensure more secure monitoring of your network devices. SNMPv3 Credentials can now be configured with SHA-256/SHA-512 algorithm in addition to the existing SHA and MD5.
General: SNMPv3 authentication using SHA-2 is now supported in add-on modules such as NCM, NFA, FWA, and OpUtils.
General: Options to edit and delete alarm notes have been added in the product UI.
General: When an alarm raised with any severity level is cleared, it denotes the completion of an alarm cycle. Alarm notes added before an alarm cycle will not be shown in alarms list in the UI, only the notes added during the current alarm cycle will be shown.
General: Previously, a few files related to license module were listed in the file integrity scanning. This issue has been fixed now.
General: Users have the option to skip TFA now. Option to disable Two Factor Authentication is now available.
General: The maximum length for username in Mail Server Settings has been increased from 100 to 255 characters.
General: Previously, a top band message was shown when BCP and MSSQL minor versions mismatched. This issue has been fixed now.
General: AD users had issues while updating their contact details under User Management. This issue has been fixed now.
General : From now on for sensitive tasks in workflow, users have to enter an OTP that is generated to perform the following actions: Add Workflow, Edit Workflow, Copy Workflow and Import Workflow.
General : Script related critical operations such as add, update and import will now be carried out with OTP authentication when TFA is enabled.
NCM: Earlier, whenever a dynamic IPUpdate was initiated from OpManager, IPAddress did not get updated in Config Management. This issue is fixed now.
Build No 126107 - August 23, 2022
General: Antisamy has been upgraded to version 1.6.4.
General: A vulnerability resulted in unauthenticated access of the user API key. This issue has been fixed now. (Reported by Anonymous working with Trend Micro Zero Day Initiative. Refer: CVE-2022-36923)
General: Unused codes have been removed to increase performance, improve security and prevent vulnerabilities in the product.
General: Unauthorized creation of files led to high resource consumption. This has been fixed now.(Reported by Tenable. Refer: CVE-2022-35404)
General: Users have the option to skip TFA now. Option to disable Two Factor Authentication is now available.
General: Support for 9 new languages has been added. Language support has been added for: Dutch, Norwegian, Brazilian Portuguese, Swedish, Turkish, Portuguese, Danish, Polish, Finnish.
General: From version 125630, there was an issue when user passwords are updated for other users by administrators via "Assign new" option under User Management. This issue has been fixed now.
General: While Adding/Editing NOC view in Chrome and Edge versions, users experienced alignment issues. This issue has been fixed now.
General: After installing the product, the loading page does not redirect to the login page. This issue has been fixed now.
OpManager: Availability graph for access points could not be loaded in Central due to an internal issue. This issue has been fixed.
OpManager: For HyperV-VMs , the OS type will now be updated automatically during discovery.
OpManager: There was an issue with VMware Rediscovery while updating LUN Details. This has been fixed now.
OpManager: Introduced the Customer & Probe filters in central under the Virtualization reports.
OpManager: There was issue while reverting adaptive thresholds in the device template. This has been fixed now.
OpManager: The XSS vulnerability issues identified in the Widgets and Inventory pages has been fixed now.
OpManager: For OpManager builds below 125303, the agent upgrade failed for existing agents that were used for log file monitoring. This has been fixed now.
OpManager : Previously, there was an issue in the addition of IPSLA monitors with SNMP v1/v2 credentials. This has been fixed now.
OpManager Storage Monitoring: OpManager has recently extended storage monitoring support for Dell Powervault ME4 Series device models.
OpManager: Previously, there was an issue with discovering devices using 'Import with CSV' option, if the 'device type' column was not present in the CSV file. This issue has been fixed now.
OpManager: For OpManager builds below 125303, the agent upgrade failed for existing agents that were used for log file monitoring. This has been fixed now.
OpManager: In agent-based server monitoring, we have enhanced the security features and file verifications before its invocation in order to avoid potential vulnerabilities.
Enterprise Edition: The Probe login process was slow previously due to multiple license calls made to the Central. This has been optimized now for a faster login process.
Build No 125659 - August 11, 2022
General : There was an issue with loading the NOC page in Embed view. This issue has been fixed now.
OpManager : Previously, there were issue in addition of IP SLA monitors with SNMP v1/v2 credentials. This has been fixed now.
Build No 125658 - July 30, 2022
General : There was a Remote Code Execution (RCE) vulnerability due to Unused API. This has been fixed now. (Reported by Piotr Bazydlo (@chudypb) of Trend Micro Zero Day Initiative. Refer: CVE-2022-37024)
Build No 125657 - July 28, 2022
General: A vulnerability resulted in unauthenticated access of the user API key. This issue has been fixed now. (Reported by Anonymous working with Trend Micro Zero Day Initiative. Refer: CVE-2022-36923)
Build No 125656 - July 25, 2022
General: Users have the option to skip TFA now. Option to disable Two Factor Authentication is now available.
General: While Adding/Editing NOC view in Chrome and Edge versions, users experienced alignment issues. This issue has been fixed now.
General: Unauthorized creation of files led to high resource consumption. This has been fixed now. (Reported by Katie(Tenable). Refer: CVE-2022-35404)
General: The unused dynamic ports have been removed.
General: If the webclient is accessed by a device from a different time zone, the time will be displayed incorrectly in the About page. This issue has been fixed now.
General: Low privilege users were able to access Server machine files using Report generation API. This issue has been fixed now.
General: Previously, 'The input specified for the parameter entity does not match the required pattern' error occurred when alarm actions were performed using entities that had special characters. This issue has been fixed as the 'alarmId' parameter is used instead of an entity.
OpManager: For OpManager builds below 125303, the agent upgrade failed for existing agents that were used for log file monitoring. This has been fixed now.
OpManager: Previously, there was an issue with discovering devices using 'Import with CSV' option, if the 'device type' column was not present in the CSV file. This issue has been fixed now.
OpManager: A JavaScript Injection vulnerability, which could be exploited by users with administrator privilege, was identified in the Root Cause Analysis module. This issue has been fixed now.(Reported by 0xmanhnv)
OpManager: SNMP v3 support is provided for IPSLA monitor configuration.
OpManager: Interface Bandwidth Utilization widgets data will now be displayed as a Bar chart.
OpManager: Once Two-factor Authentication is enabled, an OTP will now be required to enable or disable the Interface's Admin Status from OpManager.
OpManager: The ping parameter value's range in the 'ping.properties' file has now been limited to optimize the scalability in availability monitoring.
OpManager: In RMM edition, the Desktop category devices will be ignored by default during Network Discovery.
OpManager: Previously, the Engine ID of SNMPv3 devices were not updated while associating a credential or rediscovering the device from the Device Snapshot page. This issue has been fixed now.
OpManager: Previously, the SNMP version of a device was not properly updated when a new credential was associated from its Device Snapshot page. This issue has been fixed now.
OpManager: Previously, the non-ping-able devices were added multiple times into the Inventory while performing 'Save as Business View' operation in Layer2 map. This issue has been fixed now.
OpManager: Previously, SNMP polling was interrupted due to synchronization issues in the monitored devices. This issue has been fixed now.
OpManager: The availability graph in the device snapshot page shows no data under the 'History' tab when custom time period was chosen in the 'Down Statistics' tab. This issue has been fixed now.
OpManager: The Y-axis unit was missing in the Interface Rx and Tx traffic PDF report exported from the Report builder(under Inventory). This issue has been fixed now.
OpManager: Previously, the 'IP SLA Hourly Average Data' collected on the first day of each month was incorrectly populated alongwith the previous month's data. This issue has been fixed now.
OpManager: For security reasons, gif images are now restricted from being uploaded as the Business View background image or custom device icon.
OpManager: During network discovery, the approved devices with device type as 'Unknown' were not mapped to the subnet. This issue has been fixed now.
OpManager: Previously, a few devices were not mapped to their respective subnets when their IP address was modified. This issue has been fixed now.
OpManager: Previously, there were issues with creating groups when 'Group Name' was selected as the group property under the option 'Choose By Criteria'. This issue has been fixed now.
OpManager: Promotions related to the Mobile App will be displayed in the UI after logging in.
OpManager: Previously, Tray icon exe files failed File Integrity scanning. This issue has now been fixed.
OpManager: When the monitor values are negative, the minimum, maximum and average values found under the device snapshot page Graph's legends were not displayed properly. This has been fixed now
OpManager: In the Monitors Graph page (Under the device snapshot page->Monitors -> Graphs), the graph title was overlapping with the menu . This has been fixed now.
OpManager: Now you can provide the rearm value as "0", while configuring thresholds under settings->process monitors
OpManager: The XSS vulnerability issues identified in the Nutanix Cluster and Service Monitors Availability Graph page tabs have been fixed now.
OpManager: The XSS vulnerability issues identified in the Interfaces tab of the device snapshot page has been fixed now.
OpManager: The XSS vulnerability issues identified in the Custom Fields and Maps pages have been fixed now.
OpManager MSP: There was an issue while adding multiple Probes for a particular customer, if the customer name and the existing probe name were the same. This issue has been fixed now.
OpManager MSP: NAT settings will be updated in the existing probe while adding/updating in the Central server.
OpManager MSP: There was an NPE issue while adding/updating customer. This issue has been fixed now.
OpManager MSP: Probe cannot be selected in the dropdown if it is down.
OpManager MSP: In MSP Probe, for enhanced security, Two factor authentication has been made mandatory.
Enterprise Edition: Whenever the connection between a Probe and the Central is lost an email will be sent to the central admin from the 5th day till the day on which the connection is established again.
Enterprise Edition: While establishing communication with the Central a newly installed probe was stopped whenever a certification issue was noticed. This issue was identified in OpManager versions from 12.5.432 and it has been fixed now.
Build No 125639 - June 24, 2022
General: While Adding/Editing NOC view in Chrome and Edge versions, users experienced alignment issues. This issue has been fixed now.
General: Local File Inclusion vulnerability in sparkgateway component is now fixed.
Build No 125638 - June 21, 2022
General : For enhanced security, Two factor authentication has been made mandatory.
General : Earlier, there were few vulnerabilities while resetting a password using forgot password option. These have been fixed now.
General : During installation with MSSQL AD authentication, there were issues with the login, if the password had special characters such as "* (or) ~ (or) ?". It has been fixed now.
General : PostgreSQL has now been updated to version 10.20.
General : The PostgreSQL vulnerability issues from version 10.16 have now been fixed.OpManager : A new feature named Root Cause Analysis has been introduced in the product. It offers a centralized platform to visualize and analyze monitoring data of multiple network components to accelerate root cause identification.
General: A vulnerability issue identified in the 'generatexlsfile' API has been fixed now.
General: The QR code for Authenticator apps in the TOTP configuration page has been removed.
General: For enhanced security in new Windows installation, User permission for the product's root folder has been modified and can be accessed only by the installed user and the administrator group users approved with permanent access to the folder.
General: Previously, if the default "admin" credential was unchanged and not logged in for more than 7 days, an issue occurred while applying PPM for versions 125630 and above. This issue has now been fixed.
OpManager : Introduced support for V3 Admin APIs since V1 Admin APIs are deprecated on ServiceDesk Plus from version 13000.
OpManager : The availability percentage value for devices and interfaces in advanced reports and reports generated via report builder (Inventory -> Devices/Interfaces -> Generate Report) will now be displayed with decimal values.
OpManager : The child groups will no longer be visible in the group list under 'Group by Groups' option in the Inventory's Tree View filter and Dashboard's Tree View widget.
OpManager : Optimization has been done to the 'Group by Groups' option under Inventory's Tree View filter and Dashboard's Tree View widget for improved loading time.
OpManager : When a workflow is configured to delete an alarm, the status of the alarm is updated with the same severity instead of 'Clear'. This issue has been fixed.
OpManager : The SQL injection vulnerability issues identified in a few default reports have been fixed now.(Reported by Anh Vu)
OpManager : Application tab now allows users to download, install and readily setup APM plug-in by clicking on a button.
OpManager : Mail server settings for APM plugin can now be synced from the Mail server settings page under OpManager.
OpManager : If APM plugin is accessed through OpManager even before the completion of the initial sync process, a blank screen is displayed. Proper messages have been introduced on to this screen now.
OpManager : The frequent rise of credential failure alerts by Data Collection Manager (DCM) in vCenter and VMware ESXi devices due to the restriction of single active session from an IP has been fixed.
OpManager : When vCentre devices were discovered, the device type was identified to be unknown. This has been fixed now.
OpManager: The JavaScript 3D library framework (Three.js) used in 3D Rack and Floor views has been upgraded to version r137.
OpManager: Interface level scope for users is now introduced in the User Management page (under Settings -> General Settings -> User Management). Administrators can now create users with access to specific interface groups.
OpManager: Previously, the 'Add device' operation failed for devices that were deleted and re-added immediately due to unremoved entries in the server cache. This issue has been fixed now.
OpManager: Previously, the 'Add device' operation failed when the device was marked as 'ExternalNode' (device available in Add-on, but not in OpManager) in the Probe setup. This issue has been fixed now.
OpManager: Previously, the ACI topology map was not plotted due to duplicate links received in the API response from the ACI environment. This issue has been fixed now.
OpManager: Previously, VLANs with multiple ports having the same ifIndex were not discovered. This issue has been fixed now.
OpManager: During 'Add Device' operation, the SNMP devices that had no interfaces were not mapped to their respective subnet. This issue has been fixed now.
OpManager: Previously, the 'Add Cisco ACI' operation failed when the ACI was marked as 'ExternalNode' (device available in Add-on, but not in OpManager) in OpManager. This issue has been fixed now.
OpManager: An unwanted grey color scroll bar that was displayed at the bottom of the 3D floor view page is removed.
OpManager: Previously, there were issues in navigating to the device categories page from the global search option. This issue has been fixed now.
OpManager: Redirection issues in the 'Interfaces by Errors and Discards' report is now fixed.
OpManager: During scheduled discovery, a few devices were added as managed devices even when the 'Add as Unmanaged' rediscovery rule was specified. This issue has been fixed now.
OpManager: Previously, there were issues in updating an existing Device Downtime Scheduler by associating a business view. This issue has been fixed now.
OpManager: In Japanese installations, there were issues with creating or updating a Discovery Schedule profile when special characters were present in the 'Subject' and 'Message' sections under email notification. This issue has been fixed now.
OpManager: During Network discovery, the default device templates were associated with a few devices (Meraki Controllers, Meraki and SDN) instead of persisting the device type received from the Meraki API response. This issue has been fixed now.
OpManager: Previously, Layer2 discovery failed since the SNMP response value size exceeded the database field length. This issue has been fixed now.
OpManager: The device's MAC address will now be displayed for devices in the Layer2 map even if the IP address is not available and the Sysname is empty in LLDP response.
OpManager: In Layer2 maps, the devices without a valid IP address will now be skipped from being added to the Business View when the 'Save as Business View' action is performed.
OpManager: The APIs 'RediscoverInterfaces', and 'DiscoverInterface' has been removed. Alternatively, you can use 'getAllInterfacesForDevice' API to discover interfaces.
OpManager: The APIs 'getAllWanMetrics' and 'getAllVoipMetrics' has been removed. Alternatively, you can use 'getIpslaMonitors' API to fetch IP SLA monitor details.
OpManager: A new device category IoT (Internet of things) is added to the existing list of device categories.
OpManager: Around 165 new device templates have now been added for proper classification of devices during Network Discovery.
OpManager: Around 271 new SNMP performance monitors are now added.
OpManager: A few default performance monitors are added to 23 existing Device templates.
OpManager: The icon name has been updated for a few existing UPS device templates.
OpManager: Previously, there were data collection issues with a few monitors due to incorrect 'Graph Type' and 'SaveAbsolute' values. This issue has been fixed.
OpManager: Graph name correction is done for a few monitors related to CPU Utilization to properly display the 'Devices by CPU Utilization' list.
OpManager: Multiple vulnerability issues in file upload endpoints under Maps, Discovery and Custom Field modules have been fixed now.
OpManager: Previously, details about devices without credentials associated were not displayed in Bulk Test Credential Report. This issue has now been fixed.
OpManager: Previously, there were issues in generating SAML ACS URL and Logout URL when the default webserver port is used. This issue has now been fixed.
OpManager: Previously, there was an issue during migration from Essential edition to Enterprise edition if Autologin was enabled under AD Authentication. This issue has now been fixed.
OpManager: Previously, low privileged users were able to access Bulk Test Credential Reports. This issue has now been fixed.
OpManager: The SQL injection vulnerability issues identified in the Device Availability dashboard report have been fixed now.
OpManager: The XSS vulnerability issues identified under Inventory page has been fixed now.
OpManager: The popup error message that was displayed in OpManager even after upgrading SDP has been fixed now.
OpManager: Minor configuration issues related to ServiceNow Integration has been fixed now.
OpManager : Restricted file integrity scanning for 32 bit installations.
OpManager: Data collection entries were updated in the existing dynamic tables instead of the newly created dynamic tables. This issue which was identified in OpManager build version 125615 has been fixed now.
OpManager: For OpManager builds below 125303, the agent upgrade failed for existing agents that were used for log file monitoring. This has been fixed now.
OpManager MSP: You can now manage, unmanage and delete devices and interfaces in bulk from the Inventory page.
OpManager MSP: Support has been provided for using accent characters in customer name.
OpManager MSP: From version 125630, in MSP Probe, login was disabled for users other than the default user, 'admin'. This issue has been fixed now.
Enterprise Edition: From Now, The System Info page under System Performance in the Central gives visibility into the load received each Probe.
Build No 125621 - May 20, 2022
General: Low privilege users were able to access Server machine files using Report generation API. This issue has been fixed now.
General: The upgrade process failed in secondary failover setup due to an issue. This issue occurs when upgrading from builds below 125561. This issue has been fixed.
General: JFreeChart jar has been upgraded to version 0.9.19.
General: JCommon jar has been upgraded to version 0.9.4.
General: Tasks not supported in NCM have been deprecated in NCM's workflow.
General: Alarm Criteria that are not part of NCM have been deprecated in NCM's workflow.
General: While upgrading to versions 12.5.613 and above, the configured rebranding settings were not retained post upgrade due to a change in the Login page's background image. This issue has been fixed now.
General: ServiceDesk Plus MSP version 10600 is now compatible with OpManager/OpManager MSP.
General: The NOC screen was blank after the refresh interval in certain instances. This issue has been fixed now.
General: When upgrading to versions 12.5.399 and above, User Role migration failed due to missing user property entries in DB. This issue has now been fixed.
General: After upgrading to versions 12.5.415 and above, AD and Radius User login failed due to an unused System Property. This issue has now been fixed.
General: The 'Learn more' hyperlink in IDP Configuration under SAML Authentication tab has been updated now.
General: Since the NameId formats in SAML Authentication are technical terms, they can only be displayed in English.
General: jQuery has been upgraded to version 3.6.0 in order to avoid vulnerabilities.
General: jQuery UI has been upgraded to version 1.13.1 in order to avoid vulnerabilities.
General: To restrict the installation of unknown patches in the applications, it is mandatory to import the Certificate while upgrading.
General: Earlier there was a possibility of a vulnerability issue while verifying the patch integrity. The issue has been fixed now.
General: Log4j has been upgraded to version 2.17.2.
OpManager: Data collection entries were updated in the existing dynamic tables instead of the newly created dynamic tables. This issue which was identified in OpManager build version 125615 has been fixed now.
OpManager: Earlier, there was an issue in loading Datastore snapshot page in OPM Device snapshot. This issue has been fixed now.
OpManager: The SQL injection vulnerability issues identified in a few default reports have been fixed now.(Reported by Anh Vu)
OpManager: In Advanced reports, additional fields have been newly added to view the Latest Notes, Latest Notes Updated Time and Latest Notes Added by data for Alarms.
OpManager: From now, the Availability (%) monitor will be listed under Apply Criteria for filtering advanced reports.
OpManager: The SQL injection vulnerability issues in multiple inventory reports have been fixed.(Reported by Anh Vu. Refer: CVE-2022-27908) .
OpManager: The SQL injection vulnerability issues identified in a few default reports have been fixed now.
OpManager: The Data Collection Manager didn't resume polling when interfaces were managed from the interface template page. This has been fixed now.
OpManager: The occurrence of unauthorized access events during scheduled credential checks by data collection manager for APC UPS devices, has been fixed now.
OpManager: The monitor display names were not translated properly in the installation languages during the threshold alerts. This has been fixed now.
OpManager: When OpManager is unable to resolve the localhost, data archiving failed or faulty alerts were generated. This has been fixed now.
OpManager: Renamed the Dashboard, MonitorGroups, APMInsight, EUM and Admin subtabs under the Application tab to Home, Monitors, APM, User Experience and settings, respectively.
OpManager: Removed the subtabs ERP, MessageSystems, DatabaseServers, WebServers and ApplicationServers under the Application tab and brought them under the monitor tab as categories.
OpManager: The change in the IPMI device category during scheduled discovery has now been fixed.
OpManager: The change in the severity of an IPMI sensor threshold alarm from high to low was not being updated. This has been fixed now.
OpManager: String values were obtained for the IBM fan sensor OID in IPMI. This has been fixed now by retrieving numeric value from the obtained String.
OpManager: When the IPMI sensor exceeded its last polling date by more than the specified time frame, it was not being deleted. This has been fixed now.
OpManager: The IPMI data collection was affected due to the return of unconfigured status values from the devices. This has been fixed now.
OpManager: The XSS vulnerability issues in the device snapshot tab (Monitors, Installed software, Hardware, AD, Exchange, Virtual Info and IPMI Summary) & Diagnostics page have been fixed.
OpManager: The XSS vulnerability issues in the settings monitoring(Performance, Application, Windows services, Process, File, Folder, Agents, Service, URL, Eventlog and Script monitors) page have been fixed.
OpManager: The XSS Vulnerability issues in the Dashboard Widgets(Monitors Summary Widget, Virtualization widgets, AD/MSSQL/Services/Processes/Windows Services by Availability, Services by Downtime, Last Polled Value of a Performance Monitor) have been fixed.
OpManager: The XSS vulnerability issues in Maps - Layer2, Rack and Floor list views, Device Snapshot - Business view list and Inventory - Groups list view pages have been fixed now.
OpManager: Support for Wireless LAN Controller (WLC) monitoring is added for the following device types: Ruckus ZD Controller, Ruckus SZ Controller.
OpManager: Previously, business view users and users without group read permission were able to view all groups via the Inventory's Tree View filter and Tree View widget. This issue has been fixed now.
OpManager: For non-English language installations, there were issues with the downtime scheduler page when the 'Monthly' filter (with 'Day' option) was chosen. This issue has been fixed now.
OpManager: For non-English language installations, when exporting 'Health and Availability' reports, 'All devices' option was auto-selected even when a specific category was chosen in the 'Category' filter. This issue has been fixed now.
OpManager: The Device Availability chart under 'At-a-glance' report was incorrectly fetching the present day's data when custom time period was chosen. This issue has been fixed now.
OpManager: Previously, there were data collection issues in the 'Device Availability' dashboard report and 'Availability Statistics' widgets (under Business View and Category dashboards) when multiple archive tables were queried. This issue existed in OpManager with MSSQL installations and it has been fixed now.
OpManager: Previously, round-off value was shown for availability percentage in the Availability Statistics graphs (under Network -> Dashboard view, and Business view dashboard). This value can now be configured to be displayed with two decimal values.
OpManager: Redirection to the corresponding device snapshot page is now provided in the 'Top-N-Least available' charts.
OpManager: The XSS vulnerability issues in Device Template, Device Categories and Discovery modules have been fixed now.
OpManager: In the Probe setup, there was an issue with loading the floor view for the first time after a 3D floor view is created. This issue has been fixed.
OpManager Plus: Previously, the Inventory tab was visible even when the Monitoring (OPM) module was disabled. This issue has been fixed now.
OpManager Plus: Previously, the Discovery section under Settings was visible even when the Monitoring (OPM) module was disabled. This has been fixed now.
OpManager MSP: In MSP Central, unauthorized users were able to view the groups of all customers via 'Tree View' widget under custom dashboard. This issue has been fixed now.
OpManager MSP: PPM upgrade failure due to NCM add-on data has been fixed now.
OpManager MSP: Previously there was an issue while applying license from the command prompt. This issue has been fixed.
Enterprise Edition: From version 12.5.584 users had issues accessing the support diagnostics page. This issue has been fixed now.
Enterprise Edition: When a Probe starts after the Central upgrade is completed, the status of that Probe is not updated in the Smart Upgrade page of the Central server. This issue was noticed from OpManager build version 125448. It has been fixed now.
NCM: In OPM installation, IP Address will now be updated automatically in NCM when an IP update happens in OPM.
NCM: Multiple XSS vulnerabilities have been fixed in Change Notification, Credential Profile, Compliance, Show commands, Label management and Terminal Pages.
Build No 125606 - August 04, 2022
General: A vulnerability resulted in unauthenticated access of the user API key. This issue has been fixed now. (Reported by Anonymous working with Trend Micro Zero Day Initiative. Refer: CVE-2022-36923 )
General : There was a Remote Code Execution (RCE) vulnerability due to Unused API. This has been fixed now. (Reported by Piotr Bazydlo (@chudypb) of Trend Micro Zero Day Initiative. Refer: CVE-2022-37024)
Build No 125605 - June 21, 2022
OpManager: In Japanese installations, there were issues with creating or updating a Discovery Schedule profile when special characters were present in the 'Subject' and 'Message' sections under email notification. This issue has been fixed now.
OpManager: Previously, there were issues in updating an existing Device Downtime Scheduler by associating a business view. This issue has been fixed now.
OpManager: For non-English language installations, there were issues with the downtime scheduler page when the 'Monthly' filter (with 'Day' option) was chosen. This issue has been fixed now.
General: Low privilege users were able to access Server machine files using Report generation API. This issue has been fixed now.
Build No 125604 - April 22, 2022
OpManager : The SQL injection vulnerability issues identified in a few default reports have been fixed now.(Reported by Anh Vu)
OpManager : The SQL injection vulnerability issues in multiple inventory reports have been fixed.(Reported by Anh Vu. Refer: CVE-2022-27908).
OpManager : The SQL injection vulnerability issues identified in a few default reports have been fixed now.
General: The upgrade process failed in secondary failover setup due to an issue. This issue occurs when upgrading from builds below 125561. This issue has been fixed.
General: When upgrading to a version 12.5.399 and above, User Role migration failed due to missing user property entries in DB. This issue has now been fixed.
OpManager: Introduced a new VMware monitor that customers can use to monitor the disk space of their VMware Virtual Machines provided the necessary VMware tools are installed in the VM.
OpManager: When data processing was done for vmwareevents.xml during the upgrade of the enterprise setup, the upgrade failed if any changes were done to the default VMWare events in the pre-upgrade set-up. This has been fixed now.
OpManager: The XSS vulnerability issues in the mib file names, Add WMI pages under the settings and device template pages, and the "Device Count" column under Settings -> Monitoring -> Pages have now been fixed.
General : Support for SAML 2.0 based authentication is now provided. Users can now login via SAML Single Sign-On service once the Identity Provider (IdP) details are configured.
General : The authentication configuration settings are now grouped under a new section named 'Authentication' under General Settings.
General : The login page UI is now optimized for better user experience.
General : Pass-Through authentication is being deprecated and will be removed in one of the future releases before 2023. Users who have already configured Pass-Through authentication will not have any impact for now and new users will not be allowed to configure the same.
OpManager: The 'getVPNTunnelDetails' API has been removed. As an alternate, you can use 'getVPNDetails' API to fetch VPN details.
OpManager: The 'GMapDetails' API has been removed. As an alternate, you can use 'getMapProperties' API to get maps properties.
OpManager: Previously, users were unable to add IP SLA monitors when the size of the 'Application version' value exceeded the character limit of 50. This issue has been fixed now.
OpManager: The data collection polling of Switch Stack devices has now been optimized to avoid high memory usage.
OpManager: Previously, the down severity status for UPS devices were not cleared even when the device was up again. This issue has been fixed now.
OpManager: Network Path Analysis is now supported in the OpManager's Enterprise Edition for Windows installations.
OpManager: Previously, the Operator users were restricted from updating the 'Reason' column under Outage History in the Device Snapshot page. This issue has been fixed now.
OpManager: Previously, the threshold for 'VPN Tunnel Status' monitor was not configured by default if the monitor was associated manually (by using 'Add monitor' or 'Associate' option) from the Performance Monitors page. This issue has been fixed now.
OpManager: Previously, the VPN widgets were incorrectly displayed in the device snapshot page for devices that doesn't support site-to-site VPN monitoring. This issue has been fixed now.
OpManager: Previously, the threshold settings were not disabled for VPN Tunnel status monitors. This issue has been fixed now.
OpManager: Previously, the Start/Stop text in the 'Action' column of WLC's Access Points widget was overlapped with garbled characters. This issue has been fixed now.
OpManager: The XSS vulnerability issues in the Vendor Templates page have been fixed now.
OpManager: Previously, garbled characters were displayed along with the threshold values of Utilization, Error and Discard monitors in the 'Applying Interface Template' page. This issue has been fixed now.
OpManager: In the device snapshot page, the help message was not displayed for devices with 'Unknown' device type or when the device was added into OpManager in 'Not monitored' state. This issue has been fixed now.
OpManager: Previously, the users with only discovery write access were unable to add devices from the 'Add Device' page or access the snapshot page of router devices. This issue has been fixed now.
Build No 125588 - April 07, 2022
OpManager: The SQL injection vulnerability issues in multiple inventory reports have been fixed. (Reported by Anh Vu. Refer: CVE-2022-27908)
OpManager: The SQL injection vulnerability issues identified in a few default reports have been fixed now.
Build No 125587 - March 22, 2022
OpManager : A device will be automatically added in Trap Settings, when that device is discovered through the trap discovery option.
OpManager : As per the customer request, the alarm severity for cleared alarms in Spanish has been changed from 'Borrar' to 'Normal'.
OpManager :When a report in graphical format was exported using the report builder option, the report data in PDF did not match with the UI report. This issue has been fixed.
OpManager :The data in the availability reports generated for the configured Business Hour was incorrect. This issue has been fixed.
OpManager :When the category of a report is changed and exported, the data in the report was incorrect for all languages except English. This issue has been fixed.
OpManager :A scheduled report showed data of the default category, although the category was changed into 'All devices' while scheduling the report. This issue has been fixed.
OpManager :Previously, UPS devices was not shown in advanced reports. This issue has been fixed.
OpManager :The monitoring data for the interface Total Utilization Percentage was not shown, when a report was created using the Advanced Reports feature. This issue was noticed from OpManager build versions from 125416, it has been fixed now.
OpManager :Report Builder does not show data when the time period selected is large. This issue was noticed in OpManager builds after 125437, it has been fixed now.
OpManager :The invalid mailMsg parameter issue noticed in the mail message of schedule reports for Japanese and Chinese languages has been fixed.
OpManager :When a tabular report for devices was created based on monitors or instance using the Report Builder option, the exported XLS file did not have the data. This issue has been fixed now.
OpManager :The invalid parameters issue noticed in the Name of scheduled reports has been fixed.
OpManager :Previously, when the data size of a particular field in an advanced report was large, the data for that field was generated in an unreadable format. This issue which was seen in MSSQL DB has been fixed now.
OpManager :When the monitor name in an advanced report contains some special characters, the data for that monitor was not shown. This has been fixed now.
OpManager :From OpManager builds 125399, the option to export the Integrated Reports (tabular report) in XLS format was not shown in UI due to an issue. The issue is fixed now and users can now export reports in XLS format.
OpManager: A new action 'Associate Custom Field' has been added to the Discovery Rule Engine. You can now associate custom fields to devices during discovery.
OpManager : HighPerf add-on is now supported in the NetFlow Analyzer add-on in OpManager, OpManager Enterprise Edition, and OpManager Plus.
OpManager : OpManager, OpManager Enterprise Edition, and OpManager Plus now offer support for it's NFA add-ons' old HighPerf data migration into new HighPerf (CStore) database.
OpManager: Previously, the SSID count was updated instead of Client count in the WLC controller's Clients tab on clicking the refresh icon. This issue has been fixed now.
OpManager: While adding or editing a Business View, garbled characters were displayed in the device list (when a filter from the left pane was chosen) for devices that had special characters in the display name. This issue has been fixed now.
OpManager: Redirection issues with the Business View Summary widget has been fixed now.
OpManager: Previously, an error message (Rack Name already exists) was thrown when the users tried to edit the background color or tile color in the 3D Floor View. This issue has been fixed now.
OpManager: Previously, the 'Last Connected Time' for VPN Tunnels were incorrect for Cisco and Fortinet firewall devices. This issue has been fixed now.
OpManager: Previously, it was unable to add Meraki Organization if the organization name had an empty space at the start or end. This issue has now been fixed.
OpManager: Previously, incorrect data was displayed in the 'Last Polled Time' section for Clients (in Meraki Radio) and 'Detected Time' section for Rogue SSIDs (in Meraki Controller). This issue has been fixed now.
OpManager: In Data Collection Manager, the Test Credential action failed for a few SNMPv3 devices intermittently due to timed out requests. This issue has been fixed now.
OpManager: Loading issues with the Meraki snapshot widgets have been fixed now.
OpManager: Previously, the UPS devices were not listed in the device details report (when the module type is selected as 'Device') generated from Advanced Report page. This issue has been fixed now.
OpManager: A new column 'Monitoring Interval' to fetch Availability monitoring interval, has been added under General Properties for module type 'Device' in the Advanced Reports page.
OpManager: If a Device downtime scheduler is started when another scheduler is in-progress of either starting or ending its task, the devices under former downtime scheduler will not be moved to maintenance (Unmanaged) state. This issue has now been fixed.
OpManager: From OpManager builds 125559, users with business view scope were unable to access the Interface Bandwidth report from the interface snapshot page. This issue has been fixed now.
OpManager: Introduced a security feature called "File Integrity" that allows you to scan for any threat files or tampered files in your OpManager-installed directory.
OpManager: OpManager now offers support for monitoring of Windows Server 2022 and Windows 11.
OpManager: OpManager's hardware monitoring now provides new vendor support for Cisco ASR/ASA/ISR and HP Switch vendors.
OpManager The issue with discovering localhost as HyperV Host has now been fixed.
OpManager: There was issue with VM power State and Connection State value update during VMware discovery or Update inventory call if improper values were received for those params. This has been fixed now
OpManager: Fixed an issue related to reverting adaptive thresholds from the monitor settings page.
OpManager: Optimized the Database operations performed during VMware update inventory action for better performance.
OpManager: Introduced CPU and Memory columns in default servers list page that can be used to retrieve the most recent CPU and memory utilization values.
OpManager: The page loading/freezing issue while refreshing the Monitors Tab from Device Snapshot Page has now been fixed.
OpManager: In OpManagerAgent, the network bandwidth usage was increased during data file transfer when OpManager was in maintenance or down state. This issue has been fixed now.
OpManager: For improved performance, web socket communication mode is now enabled as default for agent-server communication in agent based monitoring devices.
OpManager: The false device availability alerts raised for agent based monitoring devices has now been fixed.
OpManager: In order to decrease network traffic usage, the default communication interval for agent-server communication is increased to 30 seconds. (This is applicable only for PULL_MODEL request mode.)
OpManager: The HTTP requests for export related API's (generateMonitorAvailabilityXLS, getExportDataForJson, exportScriptTemplate, exportAvailabilityGraphData) have been changed from GET to POST.
OpManager: In a triggered notification profile, the "SNMP Enabled" variable's value was in English instead of the installed language. This has been fixed.
OpManager: The 'Mute for all users' and 'Delete for all users' options available under Alarms -> Web Alarms ->Actions, have been removed.
OpManager Storage Monitoring :Storage monitoring add-on banner message was shown in the UI even after a user purchased storage monitoring license. This issue has been fixed.
OpManager Storage Monitoring :Cisco MDS devices models were not discovered when SNMP v3 credential was configured for discovery. This issue has been fixed.
OpManager Storage Monitoring :The Compellent Capacity device model will be monitored using SNMP if the SNMP credential is configured for polling the device.
OpManager Storage Monitoring :There was an issue while discovering Huawei storage devices and the device model name in the snapshot page also mismatched. Both the issues have been fixed.
OpManager Storage Monitoring :Updating SNMP v3 credentials for storage device is failed. This issue has been fixed.
OpManager Storage Monitoring :In Linux environment, while exporting a report in PDF, the device names were broken. This issue has been fixed.
OpManager Storage Monitoring :Disk count of EMC Unity and EMC Symmetrix storage devices shown in the snapshot page was incorrect. This mismatch has been fixed now.
OpManager Storage Monitoring :OpManager now extends storage monitoring support to HPE XP7 and HPE XP8 device models.
OpManager Storage Monitoring :Certain monitors have been added in the default device templates of HPE Nimble and HPE Primera.
General: While submitting a username using the 'Enter' key in the Forgot Password option, an error occurred. This has been fixed.
General: Previously, global search brought in results from all categories irrespective of the user role. This issue has been fixed.
General: Previously, the 'Reset TOTP' option disappeared from the user list (in user management page) when navigated to subsequent pages or if the list was sorted. This issue has been fixed.
OpManager MSP: From OpManager builds 125559, users were unable to view the Subnets list view page (under Inventory tab) in the MSP Probe webclient. This issue has been fixed now.
OpManager MSP: PPM Upgrade failure due to NCM Addon data, has been fixed now.
Build No 125568 - February 24, 2022
General: The upgrade process failed in secondary failover setup due to an issue. This issue occurs when upgrading from builds below 125561. This issue has been fixed.
Build No 125567 - February 23, 2022
General: The low privileged user access issue noticed in the APIs for third party integration has been fixed.
General : Low privileged users were able to access Audit reports and mail server details (Reported by Ranjit Pahan). This issue has been fixed.
General : Previously, certain issues were noticed in the product when a user entered the user name credentials during log in with different casing. This issue has now been fixed.
General: API key authentication will now be used as the login method instead of username/password, when OpManager is added as an add-on in Application Manager.
General: Two-Factor Authentication, when enabled, will be applicable for Mobile App login also.
General: Previously, Password reset logic was predictable as reported by HaYiCle. This has now been updated to enhance security.
General: Previously, there was an issue in creating and updating 'Roles' in user management when the webclient language was Japanese. This has been fixed now.
General: Previously, Password reset logic was predictable as reported by HaYiCle. This has now been updated to enhance security.
General: Unused entries in the web application deployment descriptor have been removed.
General: To improve security and prevent vulnerabilities, certain enhancements have been implemented in the product.
General: Unprivileged users were able to access end points of multiple modules. This has now been fixed.
General: The monitor performance graphs in the System Performance module failed to display the dates along with time in the X-axis. This issue has been fixed now.
General: Users were unable to save the configured Client Settings available under System Settings as an unsupported date and time format given. This issue has been resolved.
General: The API response to the Edit widget option in the Dashboard has been modified.
OpManager: The XSS vulnerability issues in the IPMI's'Edit Threshold' page and some monitors (hardware, virtualization, windows service, service, process, file, folder and URL monitors) have been fixed now.
OpManager: A new header field - 'User Agent' is now added for URL monitors. Specifying browser details here will enable OpManager to monitor restricted URLs.
OpManager: The 'Apps' tab is now renamed as 'Applications'. In addition, the APM plugin promotion page (under the Applications tab) is now revamped for better user experience.
OpManager: The XSS vulnerability issues in DCM's category filter have been fixed now.
OpManager: The Hacksaw classified SQLi vulnerability issues in Windows Service Workflow task have been fixed now.
OpManager: The APM plugin promotion pages (under the Application dashboard and Third Party integrations) is now revamped for better user experience.
OpManager: Due to a device down cache issue, the Data Collection Manager credential results showed a few devices to be down even when the actual device was up and running. This issue has been fixed now.
OpManager: Previously, there were issues with the 'Poll using IP address' option a few modules such as data collection, performance monitor addition, Windows service monitoring, hardware monitoring, etc. This issue has been fixed now.
OpManager: Previously, during Service startup, duplicate schedules were created for Forecasting Adaptive Threshold specific task which lead to increase in resource consumption. This issue has been fixed now.
OpManager: The vHostID and status parameters are now removed from mapEntity and getServiceResponseGraph APIs respectively.
OpManager: Previously, users were unable to access the Interface Snapshot page due to an internal error. This issue has been fixed now.
OpManager: Previously, the device display name was not updated when the 'CSV File Import' option was chosen under the 'Update Device Display Name' option in the Quick Configuration Wizard. This issue has been fixed now.
OpManager: 'The Add Group' button was missing in the Settings >Configurations> Interface Templates from version 12.5.430 onwards. This has now been fixed.
OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.
OpManager: The 'Add Category' option in the Donut view of Inventory page was missing from builds 125228 version. This has now been fixed.
OpManager: A column mismatch issue was witnessed while exporting PDF/XLS files (with the 'Sort by top/bottom filter' enabled) in the following reports - All Interfaces Availability, Services Monitor Availability, WAN Link Availability, Process Monitor Availability, Windows Service Monitor Availability reports. This has now been fixed.
OpManager: Interface graphs were displaying data from the raw table instead of hourly table in the scheduled report or the exported PDF. This issue has now been fixed now.
OpManager: In some cases, the OpManager upgrade failed due to an issue with discovery profile name duplication. This has been fixed now.
OpManager: The SQL injection vulnerability issues in infrastructure detail search and availability module have been fixed.
OpManager: Previously, it was unable to access the Interface Snapshot page due to an issue in the NFA module. This has been fixed now.
OpManager: 'The Add Group' button is missing int the Settings > Interfacetemplates from 125430 version. This has now been fixed.
OpManager: The LFI Injection vulnerability issues in Schedule Discovery and Device Template module have been fixed now.
OpManager: Previously, the device display name was not updated when the 'CSV File Import' option was chosen under the 'Update Device Display Name' option in the Quick Configuration Wizard. This issue has been fixed now.
OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.
OpManager: The option to enable Storage Monitoring under User Management has been removed. This enables the admin to customize the scope for Business View users for accessing Storage Monitoring functions in the UI.
OpManager: Path sanitization is now implemented for Agent based monitoring devices to prevent the possibilities of zipslip vulnerability attacks during data collection processing.
OpManager: Previously, traps from certain devices with interface IP were not processed. This issue has been fixed now.
OpManager: Previously, trap receiving was stopped because unwanted traps from the selected devices exhausted the maximum limit. This has been fixed now.
OpManager: Previously, the ESX discovery was failed if the new ESX host had an identical UUID to that of an existing one. This issue has been fixed now.
OpManager: Previously, there were issues with HyperV discovery when a HyperV host was deleted before completing inventory update and discovered again. This issue has been fixed now.
OpManager: During Xen server connection establishment, the Xen host certificate will now be imported and proceeded for further processes.
OpManager: Previously, the virtual VMs/Hosts having IPv6 address as primary had issues with being discovered as a virtual server during discovery, rediscovery or advanced monitoring. This has been fixed now.
OpManager: During VM discovery, an error message (Irrelevant parameter found in the request) was thrown due to an issue with the presence of special character "/" in the vSphere client name or when there was a cluster with no host under it. This has been fixed now.
OpManager: Issues with the search function in the Inventory Data store list page has been fixed now.
OpManager: Previously, there were issues with switching between list and table views in the Inventory list page under Virtualization tab. This has been fixed now.
OpManager: The virtual credentials are now hidden from the UI in OpManager's Standard edition.
OpManager: Previously, incorrect credential details were populated for local host when tried to change credentials from the device snapshot page. This has now been fixed.
OpManager: The HTTP method for device availability ping and trace APIs have been changed
OpManager: Previously, the credentials associated to the monitored printer device were written in the logs during data collection. This issue has been fixed now.
OpManager: Issue with Xen maps that have Japanese entity names has now been fixed.
OpManager: Japanese translation for the English phrase "Discovered Devices" in the virtualization discovery page has now been fixed.
OpManager: Update status for URL Monitors was not working due to the restricted character length for Japanese characters. This has now been fixed since the character length restriction has been eased from 100 to 150.
OpManager: Loading issues with the Topology map in the Cisco ACI snapshot page has now been fixed.
OpManager: Previously, the Availability monitoring happens via native ICMP ping when the 'localhost' was non-pingable or blocked. This has been enhanced now by enabling native ping only when both the 'localhost' and the monitoring device were unreachable.
OpManager: Previously, when the device group associated to a running Device Downtime Scheduler is updated, a few devices of the respective downtime scheduler remained in 'Unmanaged' status even after the schedule is completed. This issue has been fixed now.
OpManager: On configuring uplink dependency, the status of child devices were not automatically updated from Probe to the Central server. This issue has been fixed now.
OpManager: The scroll option in SSH terminal was not functioning in OpManager versions above 12.5.466. This has been fixed.
OpManager: Users were unable to associate Notification Profile to devices from the Quick Configuration Wizard option when the profile had URL monitors that were added from the Add URL Monitor page. This issue has been resolved.
OpManager: The message variable $lastpolledvalue is not applicable for the Central server. So, the variable has been removed from the list of message variables for all types of Notification Profiles.
OpManager: In a triggered notification profile, the category and string severity was in English instead of the installed language. This has been fixed.
OpManager: While associating a Notification Profile for devices based on Business View (BV) or Groups, the VM datastores were also listed along with BV or Group-specific devices. This issue has been fixed now.
OpManager: While creating discovery schedule, users were unable to add more than one email address in the 'Email Notification' section. This issue has been fixed now.
OpManager: Loading issues with the Meraki snapshot widgets have been fixed now.
OpManager: If a Device downtime scheduler is started when another scheduler is in-progress of either starting or ending its task, the devices under former downtime scheduler will not be moved to maintenance (Unmanaged) state. This issue has now been fixed.
OpManager: From OpManager build version 125415, traps without the agent address were received from devices that were not configured in the Trap Settings. This issue has been fixed now.
OpManager: The page loading/freezing issue while refreshing the Monitors Tab from Device Snapshot Page has now been fixed.
OpManager: From OpManager builds 125399, the option to export the Integrated Reports (tabular report) in XLS format was not shown in UI due to an issue. The issue is fixed now and users can now export reports in XLS format.
OpManager: When a tabular report for devices was created based on monitors or instance using the Report Builder option, the exported XLS file did not have the data. This issue has been fixed now.
OpManager: The monitoring data for the interface Total Utilization Percentage was not shown, when a report was created using the Advanced Reports feature. This issue was noticed from OpManager build versions from 125416, it has been fixed now.
OpManager: Report Builder does not show data when the time period selected is large. This issue was noticed in OpManager builds after 125437, it has been fixed now.
OpManager: Exporting graphical reports created using the Report Builder option failed due to an issue in the API parameters. This has been fixed now.
OpManager: From OpManager builds 125559, users with business view scope were unable to access the Interface Bandwidth report from the interface snapshot page. This issue has been fixed now.
OpManager MSP: When 'All Customers' option was chosen, the option to edit server certificate under Security Settings was not shown in MSP Central. This issue was noticed in versions 12.5.450 and above, it has been fixed now.
OpManager MSP: There were issues in transferring the user details from the Central to a newly installed Probe and this caused problems while starting and logging into the Probe. It has been fixed now.
OpManager MSP: NCM add on has been introduced for OpManager MSP.
OpManager MSP: From OpManager builds 125559, users were unable to view the Subnets list view page (under Inventory tab) in the MSP Probe webclient. This issue has been fixed now.
OpManager Storage Monitoring: Dell EMC Powermax can now be monitored with OpManager.
OpManager Storage Monitoring : OpManager now supports EMC Data Domain device models.
Build No 125476 - January 21, 2022
OpManager: The 'Add Category' option in the Donut view of Inventory page was missing from builds 125228 version. This has now been fixed.
OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.
OpManager: Previously, some of the Windows10 and Windows 2019 devices discovered using SNMP credentials were incorrectly categorised. This issue has been fixed now.
OpManager: In some cases, the WMI data collection was not occurring for multiple node monitors due to a cache mismatch issue. This has been fixed now.
OpManager: In the Device Credentials page, the CLI credentials were automatically associated with devices during other credential association. This issue has now been fixed.
OpManager: Issues with the download option in the 'Deploy Agent' page has been fixed.
OpManager: Issues with the OpManager Agent Upgrade has been resolved.
OpManager: Issues with the stored XSS vulnerability in Process Monitoring module (as reported by Ranjit Pahan) have been fixed.
OpManager: Issues with the stored XSS vulnerability in Windows Service Monitors module have now been fixed.
OpManager: Previously, there was a partial data collection issue in the HP iLO4 version due to a parameter mismatch. This has now been fixed.
OpManager: The SQL injection vulnerability issue in Report module has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-41288)
OpManager: The Device Availability widget created using Report builder failed to display data. This has been fixed now.
OpManager: The header key for viewing records displayed a different name instead of 'View Records'. This has been fixed now.
OpManager: Data collection reports and workflow logs have been removed from the list of scheduled reports, as users cannot schedule that report.
OpManager: When users tried to add Integrated Reports as a widget in the Dashboard, irrelevant parameter errors were noticed. The errors have been fixed.
OpManager: The widget for integrated reports displayed data in Area Graph view by default, even when the report was built with a bar or line graph view. This issue has been fixed.
OpManager: When an Alarm Message contained more than 4000 characters, the alarm was not generated. This issue has been fixed.
OpManager Plus: An alert was mistakenly raised, when users tried to configure the Domain Details without enabling the auto-login option. This issue has been fixed now.
OpManager: You can now generate health and inventory reports for Meraki and Cisco ACI devices through advanced reports.
OpManager: Previously, the custom interface widgets added from the report builder had loading issues if there was no data collected for the selected time period. This has been fixed now.
OpManager: Issues with background image selection in the business view feature has been fixed now.
OpManager: The 'Add Business view' option was displayed twice under the Maps tab. This issue has been fixed now.
OpManager: The map icon in the device snapshot page was navigating to an incorrect device plotted on the Google Map. This issue has been fixed now.
OpManager: Operator users will now have access to business view related widgets which was previously restricted.
OpManager: Under IPSLA settings, an option to update the threshold settings for existing VoIP, WAN RTT and Video monitors is now provided in their respective threshold template sections.
OpManager: The 'Group by Groups' filter will now list all members of the group in the Tree View widget and Tree View filter of the Inventory page. In addition, you can now navigate to the group snapshot page by right-clicking on the respective group name.
OpManager: A new feature, 'Network Path Analysis (beta version)' has been introduced in OpManager Professional edition for Windows OS. You can now visualize the traffic patterns and continuously monitor the performance of network paths between the source and destination.
OpManager: IPMI-based hardware monitoring is now supported for Supermicro vendors allowing users to intensively monitor its hardware metrics.
OpManager: Previously, IPMI alerts were only raised for sensors that were in the clear state during the time of device discovery. This issue has been fixed now.
OpManager : In versions above 12.5.399 , few widgets were not displayed when NOC view in the Dashboard, was accessed with Embed link. This issue has now been fixed.
OpManager: While creating discovery schedule, users were unable to add more than one email address in the 'Email Notification' section. This issue has been fixed now.
OpManager: Loading issues with the Meraki snapshot widgets have been fixed now.
OpManager: If a Device downtime scheduler is started when another scheduler is in-progress of either starting or ending its task, the devices under former downtime scheduler will not be moved to maintenance (Unmanaged) state. This issue has now been fixed.
OpManager: From OpManager build version 125415, traps without the agent address were received from devices that were not configured in the Trap Settings. This issue has been fixed now.
OpManager: The page loading/freezing issue while refreshing the Monitors Tab from Device Snapshot Page has now been fixed.
OpManager: From OpManager builds 125399, the option to export the Integrated Reports (tabular report) in XLS format was not shown in UI due to an issue. The issue is fixed now and users can now export reports in XLS format.
OpManager: When a tabular report for devices was created based on monitors or instance using the Report Builder option, the exported XLS file did not have the data. This issue has been fixed now.
OpManager: The monitoring data for the interface Total Utilization Percentage was not shown, when a report was created using the Advanced Reports feature. This issue was noticed from OpManager build versions from 125416, it has been fixed now.
OpManager: Report Builder does not show data when the time period selected is large. This issue was noticed in OpManager builds after 125437, it has been fixed now.
OpManager: Previously, an error message (Rack Name already exists) was thrown when the users tried to edit the background color or tile color in the 3D Floor View. This issue has been fixed now.
OpManager: Some Japanese and Chinese language characters were restricted in the Message and Subject fields while scheduling a report. This has been fixed now.
OpManager: Previously, a few devices remained in the 'Unmanaged' state even after the expiry of a downtime scheduler (run with the group filter). This occurred when the group was updated while the scheduler was still running. This issue has been fixed now.
OpManager: On configuring uplink dependency, the device status for child devices were not automatically pushed (updated) to the Central server even when updated in the Probe. This issue has been fixed now.
OpManager: The 'Add Group' button is missing in the Settings >Configurations> Interface Templates from 125430 version. This has now been fixed.
OpManager: Previously, the device display name was not updated when the 'CSV File Import' option was chosen under the 'Update Device Display Name' option in the Quick Configuration Wizard. This issue has been fixed now.
OpManager: Previously, garbled characters appeared when importing CSV file (with Shift-JIS encoding) from the Custom Fields or Update Device displayname page. This issue has now been fixed.
OpManager: Previously, UPS devices were not listed in the Devices report generated from the Advanced Reports page. This issue has now been fixed.
OpManager: Previously, during Service startup, duplicate schedules were created for Forecasting Adaptive Threshold specific task which lead to increase in resource consumption. This issue has been fixed now.
OpManager: Issue with Xen maps that have Japanese entity names has now been fixed.
OpManager: Japanese translation for the English phrase "Discovered Devices" in the virtualization discovery page has now been fixed.
OpManager: Update status for URL Monitors was not working due to the restricted character length for Japanese characters. This has now been fixed since the character length restriction has been eased from 100 to 150.
OpManager: Previously, there was an issue while migrating OpManager Essential Edition to Enterprise Edition due an internal scheduler error. This issue has been fixed now.
OpManager: The SQL injection and path traversal vulnerability issue in the Credentials module has now been fixed.
OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.
OpManager: The 'Add Category' option in the Donut view of Inventory page was missing from builds 125228 version. This has now been fixed.
General: Low privileged users were able to access Device Filters, Support Module and SDP On-Premise Integration feature (Reported by Ranjit Pahan). This issue has been fixed.
General: The XSS vulnerability issue in Task Name of Workflow has now been fixed. (Reported by Ranjit Pahan.)
General: API key's security has been enhanced with a stronger encryption algorithm.
General: The SparkGateway package has been updated to its latest version 6.0.0.
General: While submitting a username using the 'Enter' key in the Forgot Password option, an error occurred. This has been fixed now.
General: Previously, there was an issue in creating and updating 'Roles' in user management when the webclient language was Japanese. This has been fixed now.
General: Low privileged users were able to access Support Module (Reported by Ranjit Pahan). This issue has been fixed.
General: Previously there was an issue in displaying the product name in message field for the configured mail notification. This has been fixed now.
OpManager MSP : Authorization issues that were noticed in multiple modules of MSP Edition as reported by Ranjit Pahan has been fixed.
Build No 125459 - December 24, 2021
General: Low privileged users were able to access Support Module (Reported by Ranjit Pahan). This issue has been fixed.
OpManager: Previously, there was an issue while migrating OpManager Essential Edition to Enterprise Edition due an internal scheduler error. This issue has been fixed now.
OpManager: The SQL injection and path traversal vulnerability issue in the Credentials module has now been fixed.
OpManager: While upgrading OpManager Enterprise Edition to version 125445 or above, the newly added probes were not starting even after uploading the PPM files, due to a bug in the NCM addon code. This issue has been fixed now.
Build No 125457 - November 11, 2021
OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.
Build No 125456 - October 20, 2021
OpManager: The 'Add Category' option in the Donut view of Inventory page was missing from builds 125228 version. This has now been fixed.
OpManager: The SQL injection vulnerability issue in Report module has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-41288)
OpManager: The SQL injection vulnerability issue in support diagnostics module has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-40493)
OpManager: Issues with the stored XSS vulnerability in Process Monitoring module as reported by Ranjit Pahan has been fixed.
OpManager: Previously, the Windows ping pattern was garbled with Chinese (Simplified), Chinese (Traditional), and Japanese installations, resulting in polling failure. This issue has now been fixed.
OpManager: Issues with loading the 'Custom HTML or Text' widget in NOC Views have now been fixed.
OpManager: The 'View Criteria' button under 'Actions' in the Notification Profiles index page will display the poll count (as configured under Settings-> Configurations-> Device Down Settings) if 'Device down for' is selected as a Criteria.
OpManager: Custom field or device field variables, when added at the start of the 'Message' field of Email Notification Profiles, were not reflected in notification emails. This issue has now been fixed.
OpManager: There was an issue displaying search results when a BV user searched for devices. This issue has now been fixed.
OpManager: Previously, Business Views were not listed in the Scope tab if Auto-Login was not enabled. This occurred when editing Domain Details. The issue has now been fixed.
OpManager: Sometimes, the correct monitors under Notification Profile criteria were not selected while configuring Notification Profiles. This issue has now been fixed.
OpManager: Issues with loading the 'Custom HTML or Text' widget in NOC Views have now been fixed.
OpManager Plus: Previously, Applications Manager component was not included in the default OpManager Plus license. This issue has been fixed
OpManager: Users were unable to locate an alarm available in the All Alarms page of the Central server using its alarm id. This issue has been fixed.
OpManager: Users were unable to save an Alarm Escalation Rule when an alarm variable was introduced in the message field. This issue has been fixed now.
OpManager: Users were unable to save an Alarm Escalation Rule if the configured email address included '+' character. This issue has been fixed.
OpManager: Two byte characters are supported in the Message field of Generate Alarm action, and Subject and Message fields of the Send Email action.
OpManager: Previously, there was an issue with associating performance monitors that didn't have proper vendor names mapped to them. This has now been fixed.
OpManager: To ensure security, the script execution is interrupted when the complete path of the execution directory is not specified.
OpManager: Under 'LogATicket' notification profile, the description field's character length has now been increased to 500 characters.
OpManager: There was a scroll issue for some devices in the SSH terminal page. This issue has now been fixed.
OpManager: The interface bandwidth report has been enhanced to display the minimum, maximum and average values of In/Out traffic in the table view and when the mouse pointer is hovered through the graph.
OpManager: Previously, the availability monitoring (using ICMP) failed in Chinese (traditional and simplified) and Japanese language Windows installations due to a corrupted ping pattern file. This issue has now been fixed.
OpManager: In Japanese installations, the predefined text 'New BusinessView' in the Business view name field (in the Create Business View page) was displayed in English. This issue has now been fixed.
OpManager: Previously, it was unable to associate interfaces to an existing group from the Server tab. This issue has now been fixed.
OpManager: Previously, incorrect alerts were raised for 'VPN tunnel status' monitor in Cisco and Fortinet firewall devices. This issue has now been fixed.
OpManager: In Cisco firewall devices, the VPN discovery failed due to the tunnel index mismatch in the OID response. This issue has now been fixed.
OpManager: During Layer 2 discovery via LLDP, the IP address was not properly mapped to a few devices. This issue has now been fixed.
OpManager: You can now monitor the Cisco ACI environment using Out-of-Band management IP of APICs and Fabrics.
OpManager: Due to security concerns, the support for flash Business View has been stopped in OpManager. You can migrate your existing business views into HTML and continue using them.
OpManager: Previously, there were issues with device template sync operation when proxy configuration was enabled in OpManager. This issue has been fixed.
OpManager: A new feature - 'Adaptive Thresholds' has now been introduced. This will help users optimize efficiency of the incoming alerts by setting dynamic threshold values for critical monitors such as CPU performance, memory utilization and response time.
OpManager: URL monitoring is now supported as an add-on in OpManager Standard Edition. Based on their requirement, users can enable the add-on.
OpManager: ServiceDesk Plus On-Premise Integration - Users can only install ServiceDesk Plus (SDP) versions that are higher than version 11200 due to SDP V1 Request API deprecation. Customers using older versions, will have to upgrade to the higher versions to experience services continuously.
OpManager: ServiceDesk Plus Cloud Integration - Previously, users were allowed to view a maximum of 10 records, while configuring the Notification Profile to log a ticket in ServiceDesk Plus Cloud. This limit has been increased and users can view a maximum of 100 records.
OpManager: Migration issue from versions 125192 when Webhook is configured has been fixed.
OpManager: ServiceDesk Plus On-Premise Integration - Configuration issues were noticed in ServiceDesk Plus On-Premise Integration. Those issues have been fixed now.
OpManager: The SQL injection vulnerability issue in support diagnostics module has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-40493)
OpManager: The SQL injection vulnerability issue in Report module has now been fixed.(Reported by Hồng Dương Trần)
OpManager: Issues with background image selection in the Business View feature has been fixed now.
OpManager: Issues with the stored XSS vulnerability in Process Monitoring module as reported by Ranjit Pahan has been fixed
OpManager: Issues with the download option in the Deploy Agent page has been fixed.
OpManager: Issues with the stored XSS vulnerability in Windows Service Monitors module have now been fixed.
General: In some cases StandBy server upgrade was failed in MSSQL failover setup. This has been fixed.
General: ISO 8601 time format (yyyy-MM-ddThh:mm:ss) is now supported.
General: Rebranding the product will now reflect in the page footer of exported reports.
General: There was an issue highlighting the 'Set as default' icon in the dashboard page when a dashboard was set as default. This issue has now been fixed.
General: Due to security reasons, the option to 'skip' login will no longer be available during product evaluation.
General: The 'License Activation' page and the 'License Management' page will only be visible for users with administrator access to all modules.
General: There was an issue when upgrading Japanese installation to version 12.5.399 or above. This issue has now been fixed.
General: There was a CSRF vulnerability during the regeneration of API Key, as reported by Ranjit Pahan. This issue has now been fixed.
General: There was a problem in displaying the server time accurately. This issue has now been fixed.
General: There was a mismatch related to Product specific details in the license information pop-up. This issue has now been fixed.
General: The Trace Route tool under Toolset is now displayed as TraceRoute.
Build No 125437 - September 21, 2021
OpManager MSP : The Trap settings and Trap Viewer options in MSP Central has been removed.
OpManager MSP : Support for multiple probes is now available for individual customers.
OpManager MSP : Previously, there was an issue with AD domain deletion. This issue has now been fixed.
Build No 125410 - June 7, 2021
The Asset Sync feature has been introduced in OpManager MSP Central, for the ServiceDesk Plus MSP integration. Using this, users can sync and update devices from OpManager MSP Central to ServiceDesk Plus MSP.
Build No 125366 - May 20, 2021
Previously, there was an issue during upgrade if multiple constraints were missing in the Database. This issue has now been fixed.
Build No 125361 - March 24, 2021
There was a websocket connection issue when Probe name contained a space. This issue has now been fixed.
Build No 125324 - January 08, 2021
Websocket connection between Central & Probe has been optimized.
Build No 125323 - January 05, 2021
Previously, the discover device option was enabled in the getting started page of MSP Central, even if the probe was not started. This issue has now been fixed.
An issue related to special characters in Probe name has been fixed.
Customer based filter is now available in the Notification Profile creation while choosing devices.
Previously, the customer rebranded values were not reflected in the respective probes. This issue has now been fixed.
